Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING PANEL › 2014.05–2015.04
RM2040EQ _58 Vehicle Interior _014730 HEATING / AIR CONDITIONING _0075119 AIR CONDITIONING PANEL A

HEATING / AIR CONDITIONING  AIR CONDITIONING PANEL  INSTALLATION  


PROCEDURE

Hide 55900 1.INSTALL AIR CONDITIONING CONTROL ASSEMBLY

a.
E227524

Engage the guide and 4 clips to install the air conditioning control assembly as shown in the illustration.


Hide 86211 2.INSTALL NO. 1 RADIO BRACKET (w/o Navigation System)

Hide 86212 3.INSTALL NO. 2 RADIO BRACKET (w/o Navigation System)

Hide 86211J 4.INSTALL NO. 1 RADIO RECEIVER BRACKET (w/ Navigation System)

Hide 86212C 5.INSTALL NO. 2 RADIO RECEIVER BRACKET (w/ Navigation System)

Hide 86211 6.INSTALL NO. 1 RADIO BRACKET (w/ Navigation System)

Hide 86212 7.INSTALL NO. 2 RADIO BRACKET (w/ Navigation System)

Hide 8.INSTALL RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/o Navigation System)

Hide 9.INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (w/ Navigation System)

Hide 58804A 10.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

Hide 55660 12.INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 13.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 14.INSTALL REAR CONSOLE BOX ASSEMBLY

Hide 15.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Navigation System)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 64718C 16.INSTALL LUGGAGE TRIM SERVICE HOLE COVER (w/ Navigation System)