P27567F
| 1. Diagnosis Condition 2. Malfunction Status 3. Malfunction Time 4. Other
DTC Detection Condition 1: - Engine coolant temperature is 40°C (104°F) or more, ATF temperature is -10°C (14°F) or more and the vehicle is being driven with the shift lever in D (no malfunctions are detected in the shift solenoid valves (SL1, SL2, SL3, SL4 and SLU), transmission revolution sensor (NT, NC), coolant temperature sensor, knock control sensor, electronic throttle, or CAN2)
- When the ECM commands lock-up ON, lock-up does not occur.
- 3.5 seconds
- 2-trip detection logic
DTC Detection Condition 2: - Engine coolant temperature is 40°C (104°F) or more, ATF temperature is -10°C (14°F) or more and the vehicle is being driven with the shift lever in D (no malfunctions are detected in the shift solenoid valves (SL1, SL2, SL3, SL4 and SLU), transmission revolution sensor (NT, NC), coolant temperature sensor, knock control sensor, electronic throttle, or CAN2)
- When the ECM commands lock-up OFF, lock-up remains ON.
- 1.8 seconds
- 2-trip detection logic
| - Shift solenoid valve SLU remains open or closed
- Transmission valve body assembly is blocked
- Torque converter assembly
- Automatic transaxle assembly (clutch, brake, gear, etc.)
- Line pressure is too low
|