89111
1.INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for LHD, w/o ECU Integration Box RH)
Engage the clamp.
Connect the central gateway ECU (network gateway ECU) connector.
Install the central gateway ECU (network gateway ECU) with the nut.
89111
2.INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for LHD, w/ ECU Integration Box RH)
Engage the 2 claws to install the central gateway ECU (network gateway ECU).
Make sure that the central gateway ECU (network gateway ECU) is securely installed.
82877
3.INSTALL ECU INTEGRATION BOX RH (for LHD, w/ ECU Integration Box RH)
Install the ECU integration box RH with the bolt and nut.
Engage the 2 clamps.
Connect each connector.
55303B
4.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD, w/o Passenger Side Knee Airbag)
55303B
5.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD, w/ Passenger Side Knee Airbag)
73990
6.INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD, w/ Passenger Side Knee Airbag)
55607
7.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)
55317A
8.INSTALL INSTRUMENT SIDE PANEL RH (for LHD)
62311B
9.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for LHD)
62111A
10.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for LHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
67913
11.INSTALL FRONT DOOR SCUFF PLATE RH (for LHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
55476C
12.INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for LHD)
55012A
13.INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for LHD)
55435B
14.INSTALL NO. 1 METER HOOD CLUSTER (for LHD)
15.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for LHD)
for 2AR-FE:
Click hereGeneral>MAINTENANCE>2AR-FE BATTERY>INSTALLATION
for A25A-FKS:
Click hereGeneral>MAINTENANCE>A25A-FKS BATTERY>INSTALLATION
for 2GR-FKS:
Click hereGeneral>MAINTENANCE>2GR-FKS BATTERY>INSTALLATION
for 6AR-FSE:
16. PERFORM DIAGNOSTIC SYSTEM CHECK (for LHD, w/ Passenger Side Knee Airbag)
17.INSPECT SRS WARNING LIGHT (for LHD, w/ Passenger Side Knee Airbag)
89111
18.INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for RHD, w/o ECU Integration Box RH)
Connect the central gateway ECU (network gateway ECU) connector.
Install the central gateway ECU (network gateway ECU) with the nut.
89111
19.INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for RHD, w/ ECU Integration Box RH)
Engage the 2 claws to install the central gateway ECU (network gateway ECU).
Make sure that the central gateway ECU (network gateway ECU) is securely installed.
82877
20.INSTALL ECU INTEGRATION BOX RH (for RHD, w/ ECU Integration Box RH)
Install the ECU integration box RH with the bolt and 2 nuts.
Engage the clamp.
Connect each connector.
55308B
21.INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY (for RHD)
Use the same procedure as for LHD.
Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>INSTALLATION
73900
22.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for RHD, w/ Driver Side Knee Airbag)
55302D
23.INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (for RHD, w/o Driver Side Knee Airbag)
Use the same procedure as for LHD.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION
55302D
24.INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (for RHD, w/ Driver Side Knee Airbag)
Use the same procedure as for LHD.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION
53601
25.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (for RHD)
Use the same procedure as for LHD.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION
55436B
26.INSTALL NO. 2 METER HOOD CLUSTER (for RHD)
Use the same procedure as for LHD.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION
55606
27.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)
55317A
28.INSTALL INSTRUMENT SIDE PANEL RH (for RHD)
Use the same procedure as for LHD.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>INSTALLATION
62311B
29.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for RHD)
Use the same procedure as for the LH side.
Click hereVehicle Exterior>DOOR / HATCH>FRONT DOOR OPENING TRIM WEATHERSTRIP>INSTALLATION
62111A
30.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
67913
31.INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION
55434B
32.INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for RHD)
Use the same procedure as for LHD.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX>INSTALLATION
55435B
33.INSTALL NO. 1 METER HOOD CLUSTER (for RHD)
Use the same procedure as for LHD.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX>INSTALLATION
34.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for RHD)
35. PERFORM DIAGNOSTIC SYSTEM CHECK (for RHD, w/ Driver Side Knee Airbag)
36.INSPECT SRS WARNING LIGHT (for RHD, w/ Driver Side Knee Airbag)