Home › Engine / Hybrid System › A25A-FXS (COOLING) › RADIATOR › 2017.09–2017.12
RM33C0E _51 Engine / Hybrid System _065424 A25A-FXS COOLING _0328477 RADIATOR A

A25A-FXS COOLING  RADIATOR  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during radiator assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Headlight ECU sub-assembly LH
·

Synchronize the vehicle information

·

Perform headlight ECU sub-assembly LH initialization


Lighting system (EXT) (Click here)
·

Swing grill actuator assembly

·

Radiator shutter sub-assembly


Change grille shutter control mode and/or perform initialization Grille shutter system (Click here)

PROCEDURE

Hide 53851M 1.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

Hide 53852K 2.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

Hide 51441 3.REMOVE NO. 1 ENGINE UNDER COVER

Hide 4.REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY (w/ Cover)

Hide 5.DRAIN ENGINE COOLANT (for Engine)

Hide G9040 6.REMOVE INVERTER WATER PUMP ASSEMBLY

Hide 52611 8.REMOVE FRONT BUMPER ENERGY ABSORBER

Hide 52131A 9.REMOVE FRONT BUMPER REINFORCEMENT

Hide 53019F 10.REMOVE RADIATOR SHUTTER SUB-ASSEMBLY

Hide 53510 11.REMOVE HOOD LOCK ASSEMBLY

Hide 17750A 12.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 53253B 13.REMOVE UPPER RADIATOR MOUNTING BRACKET

a.
A402030

Disconnect the 2 horn connectors.


b.
A406318

Remove the 2 bolts, 2 nuts and 2 upper radiator mounting brackets.


Hide 16595B 14.REMOVE NO. 1 RADIATOR AIR GUIDE LH

a.
A406319

Remove the clip and disengage the claw.


b.

Disengage the guide to remove the No. 1 radiator air guide LH.


Hide 16593B 15.REMOVE NO. 1 RADIATOR AIR GUIDE RH

a.
A406320

Remove the clip and disengage the claw.


b.

Disengage the guide to remove the No. 1 radiator air guide RH.


Hide 53205 16.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

a.
A408331C01
0.052,0.104 0.385,0.354 0.333,0.25 12 true *A 0.031,2.479 0.385,2.74 0.354,0.26 12 true *B
*A for LHD
*B for RHD


Disengage the clamp to disconnect the hood lock control cable assembly from the upper radiator support sub-assembly.


b.
A406325

Remove the 4 bolts and upper radiator support sub-assembly.


Hide 16281F 17.DISCONNECT NO. 5 WATER BY-PASS HOSE

a.
A406326

Slide the clip and disconnect the No. 5 water by-pass hose from the radiator assembly.


Hide 16283D 18.DISCONNECT NO. 6 WATER BY-PASS HOSE

a.
A406327

Disconnect the No. 6 water by-pass hose from the radiator assembly.


Hide 16571C 19.DISCONNECT NO. 1 RADIATOR HOSE

a.
A406328

Disengage the clamp and disconnect the No. 1 radiator hose from the fan with motor assembly.


b.

Slide the clip and disconnect the No. 1 radiator hose from the radiator assembly.


Hide G9228A 20.DISCONNECT NO. 4 INVERTER COOLING HOSE

a.
A406329

Slide the clip and disconnect the No. 4 inverter cooling hose from the radiator assembly.


Hide G9229A 21.DISCONNECT NO. 5 INVERTER COOLING HOSE

a.
A406330

Disengage the 2 clamps and disconnect the No. 5 inverter cooling hose from the fan with motor assembly.


Hide G9226A 22.DISCONNECT NO. 2 INVERTER COOLING HOSE

a.
A406331

Disengage the clamp and disconnect the No. 2 inverter cooling hose from the fan with motor assembly.


Hide 16572D 23.DISCONNECT NO. 2 RADIATOR HOSE

a.
A406332

Disengage the clamp and disconnect the No. 2 radiator hose from the fan with motor assembly.


b.

Slide the clip and disconnect the No. 2 radiator hose from the radiator assembly.


Hide G9227A 24.REMOVE NO. 3 INVERTER COOLING HOSE

a.
A406333

Disengage the clamp and disconnect the No. 3 inverter cooling hose from the fan with motor assembly.


b.

Slide the clip and remove the No. 3 inverter cooling hose from the radiator assembly.


Hide 16400 25.REMOVE RADIATOR ASSEMBLY

a.
A406337

Disengage the 4 clamps to disconnect the wire harness from the fan with motor assembly.


b.
A406334

Disconnect the cooling fan motor connector.


c.

Disengage the wire harness clamp.


d.
A406335

Rotate the lever while pushing the lock, and disconnect the cooling fan motor connector.

NOTICE:

After disconnecting the cooling fan motor connector, make sure that dirt, water or other foreign matter does not contact the connecting parts of the cooling fan motor connector.



e.

Disengage the wire harness clamp.


f.
A406338

Disengage the 2 claws.


g.

Disengage the 2 guides to separate the cooler condenser assembly from the radiator assembly.

NOTICE:

Make sure not to damage the cooler condenser assembly when separating the cooler condenser assembly.



h.

Remove the radiator assembly with the fan with motor assembly from the vehicle body.

NOTICE:

Do not apply excessive force to the cooler condenser assembly or pipe when removing the radiator assembly with the fan with motor assembly.



i.
A406339

Disengage the 2 claws.


j.

Disengage the 2 guides to remove the fan with motor assembly from the radiator assembly.

NOTICE:

Do not damage the radiator assembly when removing the fan with motor assembly.



Hide 16523A 26.REMOVE RADIATOR SUPPORT CUSHION

a.

Remove the 2 radiator support cushions from the radiator assembly.


Hide 16535 27.REMOVE LOWER RADIATOR SUPPORT

a.

Remove the 2 lower radiator supports from the radiator assembly.