Home › Power Source / Network › NETWORKING › NETWORK GATEWAY ECU › from 2017.12
RM33C0E _57 Power Source / Network _065454 NETWORKING _0329711 NETWORK GATEWAY ECU A

NETWORKING  NETWORK GATEWAY ECU  INSTALLATION  


CAUTION / NOTICE / HINT

PROCEDURE

Hide 89111 1.INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for LHD)

a.
C381270

Engage the 2 claws to install the central gateway ECU (network gateway ECU).

NOTICE:

Make sure that the central gateway ECU (network gateway ECU) is securely installed.



Hide 82877 2.INSTALL ECU INTEGRATION BOX RH (for LHD)

a.

Install the ECU integration box RH with the bolt and nut.

Torque:
Bolt : 7.5 N*m (76 kgf*cm, 66 in.*lbf)
Nut : 5.5 N*m (56 kgf*cm, 49 in.*lbf)


b.

Engage the 2 clamps.


c.

Connect each connector.


Hide 55303B 3.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD, w/o Passenger Side Knee Airbag)

Hide 55303B 4.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD, w/ Passenger Side Knee Airbag)

Hide 73990 5.INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY (for LHD, w/ Passenger Side Knee Airbag)

Hide 55607 6.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

Hide 55317A 7.INSTALL INSTRUMENT SIDE PANEL RH (for LHD)

Hide 62311B 8.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for LHD)

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Exterior>DOOR / HATCH>FRONT DOOR OPENING TRIM WEATHERSTRIP>INSTALLATION


Hide 62111A 9.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for LHD)

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 67913 10.INSTALL FRONT DOOR SCUFF PLATE RH (for LHD)

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 55476C 11.INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for LHD)

Hide 55012A 12.INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY (for LHD)

Hide 55435B 13.INSTALL NO. 1 METER HOOD CLUSTER (for LHD)

Hide 89111 14.INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU) (for RHD)

a.
C377924

Engage the 2 claws to install the central gateway ECU (network gateway ECU).

NOTICE:

Make sure that the central gateway ECU (network gateway ECU) is securely installed.



Hide 82877 15.INSTALL ECU INTEGRATION BOX RH (for RHD)

a.

Install the ECU integration box RH with the bolt and 2 nuts.

Torque:
Bolt : 7.5 N*m (76 kgf*cm, 66 in.*lbf)
Nut : 5.5 N*m (56 kgf*cm, 49 in.*lbf)


b.

Engage the clamp.


c.

Connect each connector.


Hide 55308B 16.INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY (for RHD)

HINT:

Use the same procedure as for LHD.

Click hereVehicle Interior>HEATING / AIR CONDITIONING>AIR CONDITIONING UNIT>INSTALLATION


Hide 73900 17.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (for RHD, w/ Driver Side Knee Airbag)

Hide 55302D 18.INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (for RHD, w/o Driver Side Knee Airbag)

Hide 55302D 19.INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY (for RHD, w/ Driver Side Knee Airbag)

Hide 53601 20.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (for RHD)

Hide 55436B 21.INSTALL NO. 2 METER HOOD CLUSTER (for RHD)

Hide 55606 22.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)

Hide 55317A 23.INSTALL INSTRUMENT SIDE PANEL RH (for RHD)

Hide 62311B 24.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for RHD)

HINT:

Use the same procedure as for LHD.

Click hereVehicle Exterior>DOOR / HATCH>FRONT DOOR OPENING TRIM WEATHERSTRIP>INSTALLATION


Hide 62111A 25.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)

HINT:

Use the same procedure as for LHD.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 67913 26.INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)

HINT:

Use the same procedure as for LHD.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION


Hide 55434B 27.INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for RHD)

HINT:

Use the same procedure as for LHD.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX>INSTALLATION


Hide 55435B 28.INSTALL NO. 1 METER HOOD CLUSTER (for RHD)

HINT:

Use the same procedure as for LHD.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX>INSTALLATION


Hide 29.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

Hide 64718C 30.INSTALL LUGGAGE TRIM SERVICE HOLE COVER

Hide 31. PERFORM DIAGNOSTIC SYSTEM CHECK (w/ Passenger Side Knee Airbag)

Hide 32.INSPECT SRS WARNING LIGHT (w/ Passenger Side Knee Airbag)