Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2019.10–2021.02
RM33C0E _58 Vehicle Interior _065458 METER / GAUGE / DISPLAY _0330016 METER / GAUGE SYSTEM C

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  B150819  Turn Signal/Hazard Flasher Circuit Current Above Threshold  


DESCRIPTION

This DTC is stored when the combination meter assembly detects a short in a turn signal light circuit.

HINT:

If there is a short in a turn signal light circuit, all of the turn signal lights in that circuit will not blink.


DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
B150819 Turn Signal/Hazard Flasher Circuit Current Above Threshold Diagnosis Condition:

Auxiliary battery voltage is 10 V or more


Malfunction Status:

Short in turn signal light circuit


·

Headlight ECU sub-assembly*6

·

Head light unit assembly*6

·

Headlight lens*1

·

Front turn signal light socket*7

·

Side turn signal light assembly

·

Outer rear view mirror assembly*4

·

Outer mirror retractor*8

·

Rear combination light assembly*2

·

Rear combination light cord*2

·

Rear combination light socket and wire*3

·

Harness or connector

·

Combination meter assembly


DTC stored -

*1: for LED Type Turn Signal Light

*2: for LED Type Back-up Light

*3: for Bulb Type Back-up Light

*4: w/ Seat Position Memory System

*5: w/o Seat Position Memory System

*6: w/ Automatic Headlight Beam Level Control System

*7: w/o Automatic Headlight Beam Level Control System

*8: w/ Power Retract Mirror


WIRING DIAGRAM

LH SIDE


E429187E01
5.656,0.333 6.083,0.656 0.427,0.323 10 false LL 1.219,1.5 4.052,1.844 2.833,0.344 10 false Headlight Assembly LH 1.573,3.896 3.625,4.188 2.052,0.292 10 false Headlight ECU Sub-assembly LH 0.26,3.781 1.146,4.146 0.885,0.365 10 false Headlight Unit Assembly LH 1.167,4.75 4,5.094 2.833,0.344 10 false Headlight Assembly LH 2.219,2.365 2.802,2.625 0.583,0.26 10 false TURN+ 2.229,2.958 2.813,3.219 0.583,0.26 10 false TURN- 2.229,6.146 2.813,6.406 0.583,0.26 10 false TURN- 2.219,5.542 2.802,5.802 0.583,0.26 10 false TURN+ 3.313,2.333 3.896,2.594 0.583,0.26 10 false TNS 3.344,5.531 3.927,5.792 0.583,0.26 10 false TNS 3.313,6.125 3.896,6.385 0.583,0.26 10 false GND 3.302,2.948 3.885,3.208 0.583,0.26 10 false GND 0.51,6.5 3.344,6.844 2.833,0.344 10 false Headlight Lens LH 1.271,7.958 4.104,8.302 2.833,0.344 10 false Headlight Assembly LH 1.552,7.104 3.615,7.406 2.063,0.302 10 false Headlight ECU Sub-assembly LH 0.26,6.969 1.146,7.333 0.885,0.365 10 false Headlight Unit Assembly LH 5.708,7.938 6.875,8.344 1.167,0.406 10 false Combination Meter Assembly 0.073,8.615 3.865,8.896 3.792,0.281 10 false *1: w/o Automatic Headlight Beam Level Control System 2.427,9.438 5.26,9.781 2.833,0.344 10 false *4: for LED Type Turn Signal Light 0.083,9.031 3.583,9.344 3.5,0.313 10 false *2: w/ Automatic Headlight Beam Level Control System 0.083,9.448 3.708,9.75 3.625,0.302 10 false *3: for Bulb Type Turn Signal Light 5,0.313 5.427,0.635 0.427,0.323 10 false *1 4.813,2.344 5.24,2.667 0.427,0.323 10 false *2, *3 4.813,5.542 5.24,5.865 0.427,0.323 10 false *2, *4 2.042,5.542 2.469,5.865 0.427,0.323 10 false 9 1.979,6.125 2.406,6.448 0.427,0.323 10 false 13 3.708,5.531 4.135,5.854 0.427,0.323 10 false 11 3.708,6.115 4.135,6.438 0.427,0.323 10 false 12 2.042,2.354 2.469,2.677 0.427,0.323 10 false 9 1.969,2.958 2.396,3.281 0.427,0.323 10 false 13 3.698,2.333 4.125,2.656 0.427,0.323 10 false 11 3.708,2.927 4.135,3.25 0.427,0.323 10 false 12 5.344,0.344 5.771,0.667 0.427,0.323 10 false 11 1.51,1 4.344,1.344 2.833,0.344 10 false Front Turn Signal Light Socket LH 6.156,3.573 6.802,3.969 0.646,0.396 10 false FLASHER IC 0.875,1.5 1.302,1.823 0.427,0.323 10 false A76 1.573,3.74 2,4.063 0.427,0.323 10 false B 1.552,6.948 1.979,7.271 0.427,0.323 10 false B 5.417,7.938 5.844,8.26 0.427,0.323 10 false K20 3.74,0.313 4.167,0.635 0.427,0.323 10 false 1 3.74,0.677 4.167,1 0.427,0.323 10 false 2 3.479,0.313 3.906,0.635 0.427,0.323 10 false B 3.49,0.677 3.917,1 0.427,0.323 10 false E 5.219,7.875 5.646,8.198 0.427,0.323 10 false A 0.844,4.75 1.271,5.073 0.427,0.323 10 false A78 0.938,7.958 1.365,8.281 0.427,0.323 10 false A78

E427848E01
5.188,0.083 5.708,0.354 0.521,0.271 10 false A 6.156,2.01 6.813,2.385 0.656,0.375 10 false FLASHER IC 5.646,4.26 6.854,4.656 1.208,0.396 10 false Combination Meter Assembly 1.271,3.542 2.5,4.021 1.229,0.479 10 false Outer Mirror Control ECU Assembly LH 3.396,0.583 3.917,0.854 0.521,0.271 10 false B 3.302,1.167 3.823,1.438 0.521,0.271 10 false -*2 3.26,0.979 3.865,1.354 0.604,0.375 10 false E*1 0.729,2.438 3.5,2.74 2.771,0.302 10 false Outer Rear View Mirror Assembly LH 2.094,1.521 3.01,1.99 0.917,0.469 10 false Outer Mirror Retractor LH*6 0.417,1.531 1.792,1.906 1.375,0.375 10 false Side Turn Signal Light Assembly LH 0.229,5.302 2.938,5.563 2.708,0.26 10 false *5: for 16 Pin Connector 2.833,5.302 5.542,5.563 2.708,0.26 10 false *6: w/ Power Retract Mirror 4.042,1.281 4.563,1.552 0.521,0.271 10 false O20 5.323,4.26 5.844,4.531 0.521,0.271 10 false K20 4.125,0.5 4.646,0.771 0.521,0.271 10 false 5 4.146,1.083 4.667,1.354 0.521,0.271 10 false 4 0.229,4.885 2.458,5.135 2.229,0.25 10 false *3: for 7 Pin Connector 2.833,4.885 5.063,5.135 2.229,0.25 10 false *4: for 11 Pin Connector 0.229,4.458 2.938,4.719 2.708,0.26 10 false *1: w/o Seat Position Memory System 2.833,4.458 5.542,4.719 2.708,0.26 10 false *2: w/ Seat Position Memory System 4.031,0.688 4.552,0.958 0.521,0.271 10 false O20 4.448,1.281 4.969,1.552 0.521,0.271 10 false O16 4.427,0.688 4.948,0.958 0.521,0.271 10 false O16 4.479,0.5 5,0.771 0.521,0.271 10 false 10 4.49,1.083 5.01,1.354 0.521,0.271 10 false 11 2.479,2.906 3,3.177 0.521,0.271 10 false 12 2.479,3.125 3,3.396 0.521,0.271 10 false O9 2.01,3.125 2.531,3.396 0.521,0.271 10 false HTR- 1.438,3.135 1.958,3.406 0.521,0.271 10 false GND 1.125,2.927 1.594,3.417 0.469,0.49 10 false 7 1.073,3.125 1.542,3.615 0.469,0.49 10 false O8 3.625,1.281 4.146,1.552 0.521,0.271 10 false O21 3.625,0.688 4.146,0.958 0.521,0.271 10 false O21 3.677,0.49 4.198,0.76 0.521,0.271 10 false 16 3.667,1.073 4.188,1.344 0.521,0.271 10 false 15 4.583,2.99 5.104,3.26 0.521,0.271 10 false *2 4.083,0.906 4.604,1.177 0.521,0.271 10 false *3 4.479,0.906 5,1.177 0.521,0.271 10 false *4 3.667,0.906 4.188,1.177 0.521,0.271 10 false *5 4.063,1.479 4.583,1.75 0.521,0.271 10 false *3 4.479,1.49 5,1.76 0.521,0.271 10 false *4 3.667,1.49 4.188,1.76 0.521,0.271 10 false *5 4.646,3.583 5.167,3.854 0.521,0.271 10 false *1

E372757E11
1.01,1.177 3.448,1.479 2.438,0.302 10 false Rear Combination Light Cord LH 0.719,3.823 3.156,4.125 2.438,0.302 10 false Rear Combination Light Assembly LH 0.74,1.646 3.177,1.948 2.438,0.302 10 false Rear Combination Light Assembly LH 0.281,3.344 3.042,3.677 2.76,0.333 10 false Rear Combination Light Socket and Wire LH 5.625,0.448 6.063,0.74 0.438,0.292 10 false TRNL 5.646,4.552 6.833,4.99 1.188,0.438 10 false Combination Meter Assembly 0.188,5.26 2.625,5.563 2.438,0.302 10 false *1: for LED Type Back-up Light 2.458,5.26 4.896,5.563 2.438,0.302 10 false *2: for Bulb Type Back-up Light 4.969,0.458 5.406,0.75 0.438,0.292 10 false *1 4.958,2.615 5.396,2.906 0.438,0.292 10 false *2 6.156,1.552 6.813,1.958 0.656,0.406 10 false FLASHER IC 2.958,0.458 3.396,0.75 0.438,0.292 10 false B 2.958,0.833 3.396,1.125 0.438,0.292 10 false E 2.958,2.625 3.396,2.917 0.438,0.292 10 false B 2.969,2.979 3.406,3.271 0.438,0.292 10 false E 0.313,1.646 0.75,1.938 0.438,0.292 10 false W13 0.271,3.823 0.708,4.115 0.438,0.292 10 false W13 5.344,0.458 5.781,0.75 0.438,0.292 10 false 10 3.146,0.458 3.583,0.75 0.438,0.292 10 false 3 3.167,0.823 3.604,1.115 0.438,0.292 10 false 4 3.156,2.979 3.594,3.271 0.438,0.292 10 false 4 3.146,2.625 3.583,2.917 0.438,0.292 10 false 3 5.365,4.552 5.802,4.844 0.438,0.292 10 false K20


RH SIDE


E429187E02
5.656,0.333 6.083,0.656 0.427,0.323 10 false LR 1.219,1.5 4.052,1.844 2.833,0.344 10 false Headlight Assembly RH 1.573,3.896 3.625,4.188 2.052,0.292 10 false Headlight ECU Sub-assembly RH 0.26,3.781 1.146,4.146 0.885,0.365 10 false Headlight Unit Assembly RH 1.167,4.75 4,5.094 2.833,0.344 10 false Headlight Assembly RH 2.219,2.365 2.802,2.625 0.583,0.26 10 false TURN+ 2.229,2.958 2.813,3.219 0.583,0.26 10 false TURN- 2.229,6.146 2.813,6.406 0.583,0.26 10 false TURN- 2.219,5.542 2.802,5.802 0.583,0.26 10 false TURN+ 3.313,2.333 3.896,2.594 0.583,0.26 10 false TNS 3.344,5.531 3.927,5.792 0.583,0.26 10 false TNS 3.313,6.125 3.896,6.385 0.583,0.26 10 false GND 3.302,2.948 3.885,3.208 0.583,0.26 10 false GND 0.51,6.5 3.344,6.844 2.833,0.344 10 false Headlight Lens RH 1.271,7.958 4.104,8.302 2.833,0.344 10 false Headlight Assembly RH 1.552,7.104 3.615,7.406 2.063,0.302 10 false Headlight ECU Sub-assembly RH 0.26,6.969 1.146,7.333 0.885,0.365 10 false Headlight Unit Assembly RH 5.708,7.938 6.875,8.344 1.167,0.406 10 false Combination Meter Assembly 2.448,9.531 5.281,9.875 2.833,0.344 10 false *4: for LED Type Turn Signal Light 0.094,9.167 3.594,9.479 3.5,0.313 10 false *2: w/ Automatic Headlight Beam Level Control System 0.094,9.521 3.719,9.823 3.625,0.302 10 false *3: for Bulb Type Turn Signal Light 5,0.313 5.427,0.635 0.427,0.323 10 false *1 4.813,2.344 5.24,2.667 0.427,0.323 10 false *2, *3 4.813,5.542 5.24,5.865 0.427,0.323 10 false *2, *4 2.042,5.542 2.469,5.865 0.427,0.323 10 false 9 1.979,6.125 2.406,6.448 0.427,0.323 10 false 13 3.688,5.531 4.115,5.854 0.427,0.323 10 false 11 3.698,6.125 4.125,6.448 0.427,0.323 10 false 12 2.042,2.354 2.469,2.677 0.427,0.323 10 false 9 1.969,2.958 2.396,3.281 0.427,0.323 10 false 13 3.698,2.344 4.125,2.667 0.427,0.323 10 false 11 3.698,2.938 4.125,3.26 0.427,0.323 10 false 12 5.406,0.323 5.833,0.646 0.427,0.323 10 false 7 1.51,1 4.344,1.344 2.833,0.344 10 false Front Turn Signal Light Socket RH 6.156,3.573 6.802,3.969 0.646,0.396 10 false FLASHER IC 0.875,1.5 1.302,1.823 0.427,0.323 10 false A75 1.573,3.74 2,4.063 0.427,0.323 10 false B 1.552,6.948 1.979,7.271 0.427,0.323 10 false B 5.417,7.938 5.844,8.26 0.427,0.323 10 false K20 3.74,0.313 4.167,0.635 0.427,0.323 10 false 1 3.74,0.677 4.167,1 0.427,0.323 10 false 2 3.479,0.313 3.906,0.635 0.427,0.323 10 false B 3.49,0.677 3.917,1 0.427,0.323 10 false E 0.875,4.75 1.302,5.073 0.427,0.323 10 false A79 0.938,7.958 1.365,8.281 0.427,0.323 10 false A79 5.219,7.875 5.646,8.198 0.427,0.323 10 false A 0.104,8.781 3.604,9.094 3.5,0.313 10 false *1: w/o Automatic Headlight Beam Level Control System

E427848E02
5.188,0.083 5.708,0.354 0.521,0.271 10 false A 6.156,2.01 6.813,2.385 0.656,0.375 10 false FLASHER IC 5.646,4.26 6.854,4.656 1.208,0.396 10 false Combination Meter Assembly 1.271,3.542 2.5,4.021 1.229,0.479 10 false Outer Mirror Control ECU Assembly RH 3.396,0.583 3.917,0.854 0.521,0.271 10 false B 3.302,1.167 3.823,1.438 0.521,0.271 10 false -*2 3.26,0.979 3.865,1.354 0.604,0.375 10 false E*1 0.729,2.448 3.5,2.75 2.771,0.302 10 false Outer Rear View Mirror Assembly RH 2.094,1.521 3.01,1.99 0.917,0.469 10 false Outer Mirror Retractor RH*6 0.417,1.531 1.792,1.906 1.375,0.375 10 false Side Turn Signal Light Assembly RH 0.229,5.313 2.938,5.573 2.708,0.26 10 false *5: for 11 Pin Connector 2.833,5.302 5.542,5.563 2.708,0.26 10 false *6: w/ Power Retract Mirror 4.042,1.281 4.563,1.552 0.521,0.271 10 false N18 5.323,4.26 5.844,4.531 0.521,0.271 10 false K20 4.125,0.5 4.646,0.771 0.521,0.271 10 false 5 4.146,1.083 4.667,1.354 0.521,0.271 10 false 4 0.229,4.885 2.458,5.135 2.229,0.25 10 false *3: for 7 Pin Connector 2.833,4.885 5.063,5.135 2.229,0.25 10 false *4: for 16 Pin Connector 0.229,4.458 2.938,4.719 2.708,0.26 10 false *1: w/o Seat Position Memory System 2.833,4.458 5.542,4.719 2.708,0.26 10 false *2: w/ Seat Position Memory System 4.031,0.688 4.552,0.958 0.521,0.271 10 false N18 4.448,1.281 4.969,1.552 0.521,0.271 10 false N17 4.427,0.688 4.948,0.958 0.521,0.271 10 false N17 3.688,0.5 4.208,0.771 0.521,0.271 10 false 10 3.677,1.094 4.198,1.365 0.521,0.271 10 false 11 2.479,2.906 3,3.177 0.521,0.271 10 false 12 2.458,3.125 2.979,3.396 0.521,0.271 10 false N10 2.01,3.125 2.531,3.396 0.521,0.271 10 false HTR- 1.438,3.135 1.958,3.406 0.521,0.271 10 false GND 1.125,2.927 1.594,3.417 0.469,0.49 10 false 7 1.073,3.125 1.542,3.615 0.469,0.49 10 false N9 3.625,1.281 4.146,1.552 0.521,0.271 10 false N19 3.625,0.688 4.146,0.958 0.521,0.271 10 false N19 4.469,0.5 4.99,0.771 0.521,0.271 10 false 16 4.469,1.094 4.99,1.365 0.521,0.271 10 false 15 4.583,2.99 5.104,3.26 0.521,0.271 10 false *2 4.083,0.906 4.604,1.177 0.521,0.271 10 false *3 4.479,0.906 5,1.177 0.521,0.271 10 false *4 3.667,0.906 4.188,1.177 0.521,0.271 10 false *5 4.063,1.479 4.583,1.75 0.521,0.271 10 false *3 4.479,1.49 5,1.76 0.521,0.271 10 false *4 3.667,1.49 4.188,1.76 0.521,0.271 10 false *5 4.646,3.583 5.167,3.854 0.521,0.271 10 false *1

E372757E12
1.01,1.177 3.448,1.479 2.438,0.302 10 false Rear Combination Light Cord RH 0.719,3.823 3.156,4.125 2.438,0.302 10 false Rear Combination Light Assembly RH 0.74,1.646 3.177,1.948 2.438,0.302 10 false Rear Combination Light Assembly RH 0.292,3.344 3.052,3.677 2.76,0.333 10 false Rear Combination Light Socket and Wire RH 5.625,0.448 6.063,0.74 0.438,0.292 10 false TRNR 5.646,4.552 6.833,4.99 1.188,0.438 10 false Combination Meter Assembly 0.188,5.26 2.625,5.563 2.438,0.302 10 false *1: for LED Type Back-up Light 2.458,5.26 4.896,5.563 2.438,0.302 10 false *2: for Bulb Type Back-up Light 4.969,0.458 5.406,0.75 0.438,0.292 10 false *1 4.958,2.615 5.396,2.906 0.438,0.292 10 false *2 6.156,1.552 6.813,1.958 0.656,0.406 10 false FLASHER IC 2.958,0.458 3.396,0.75 0.438,0.292 10 false B 2.958,0.833 3.396,1.125 0.438,0.292 10 false E 2.958,2.625 3.396,2.917 0.438,0.292 10 false B 2.969,2.979 3.406,3.271 0.438,0.292 10 false E 0.313,1.646 0.75,1.938 0.438,0.292 10 false W12 0.271,3.823 0.708,4.115 0.438,0.292 10 false W12 5.344,0.458 5.781,0.75 0.438,0.292 10 false 13 3.146,0.458 3.583,0.75 0.438,0.292 10 false 3 3.167,0.823 3.604,1.115 0.438,0.292 10 false 4 3.156,2.979 3.594,3.271 0.438,0.292 10 false 4 3.146,2.625 3.583,2.917 0.438,0.292 10 false 3 5.365,4.552 5.802,4.844 0.438,0.292 10 false K20


CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.

·

Inspect the turn signal light bulbs and sockets before performing the following procedure.



PROCEDURE

1.INSPECT LIGHTS
a.

Inspect the illumination of each turn signal light.


Result:
Result Proceed to
All LH turn signal lights do not blink A
All RH turn signal lights do not blink B



A

2.CONFIRM MODEL

B

16.CONFIRM MODEL
2.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
w/ Automatic Headlight Beam Level Control System A
w/o Automatic Headlight Beam Level Control System B



A

3.CHECK HEADLIGHT ASSEMBLY LH

B

7.CHECK HEADLIGHT ASSEMBLY LH
3.CHECK HEADLIGHT ASSEMBLY LH
a.

Disconnect the A78 headlight assembly LH connector.


b.

Operate the headlight dimmer switch assembly and check that the LH side turn signal lights other than the headlight turn signal light blink.

HINT:

If the LH side turn signal lights blink, the headlight assembly LH is malfunctioning.



Result:
Result Proceed to
LH side turn signal lights blink A
LH side turn signal lights do not blink B



A

4.CHECK HEADLIGHT ECU SUB-ASSEMBLY LH

B

8.CHECK OUTER REAR VIEW MIRROR ASSEMBLY LH
4.CHECK HEADLIGHT ECU SUB-ASSEMBLY LH
E431889C01
5.604,0.323 5.906,0.531 0.302,0.208 2.25,0.219 2.583,0.427 0.333,0.208 1.219,0.302 1.646,0.813 true 3.146,0.865 3.458,0.323 true 5.323,0.979 5.083,0.385 true 6.052,1.104 6.448,0.385 true 0.094,0.115 0.406,0.313 0.313,0.198 10 false *a 5.708,0.333 6.021,0.531 0.313,0.198 10 false B 1.073,0.115 1.385,0.313 0.313,0.198 10 false TNS 3.354,0.146 3.667,0.344 0.313,0.198 10 false GND 4.875,0.198 5.406,0.417 0.531,0.219 10 false TURN+ 6.271,0.198 6.823,0.417 0.552,0.219 10 false TURN- 2.292,0.24 2.604,0.438 0.313,0.198 10 false A78
*a Component without harness connected
(Headlight ECU Sub-assembly LH)
- -


a.

Remove the headlight ECU sub-assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ECU>REMOVAL


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
B-9 (TURN+) - B-13 (TURN-)
or
A78-11 (TNS) - A78-12 (GND)
Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

5.CONFIRM MODEL

NG

REPLACE HEADLIGHT ECU SUB-ASSEMBLY LH

5.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for LED Type Turn Signal Light A
for Bulb Type Turn Signal Light B



A

6.INSPECT HEADLIGHT LENS LH

B

7.CHECK HEADLIGHT ASSEMBLY LH
a.

Disconnect the A76 headlight assembly LH connector.


b.

Operate the headlight dimmer switch assembly and check that the LH side turn signal lights other than the headlight turn signal light blink.

HINT:

If the LH side turn signal lights blink, the front turn signal light socket LH is malfunctioning.



Result:
Result Proceed to
LH side turn signal lights blink A
LH side turn signal lights do not blink B



A

B

8.CHECK OUTER REAR VIEW MIRROR ASSEMBLY LH
8.CHECK OUTER REAR VIEW MIRROR ASSEMBLY LH
a.

Connect the A76 headlight assembly LH*1 connector.


b.

Connect the A78 headlight assembly LH*2 connector.


c.

Disconnect the O16 outer rear view mirror assembly LH*3 connector.


d.

Disconnect the O20 outer rear view mirror assembly LH*4 connector.


e.

Disconnect the O21 outer rear view mirror assembly LH*5 connector.


f.

Operate the headlight dimmer switch assembly and check that the LH side turn signal lights other than the side turn signal light blink.

HINT:

If the LH side turn signal lights blink, the outer rear view mirror assembly LH is malfunctioning.



*1: w/o Automatic Headlight Beam Level Control System

*2: w/ Automatic Headlight Beam Level Control System

*3: for 11 Pin Connector

*4: for 7 Pin Connector

*5: for 16 Pin Connector


Result:
Result Proceed to
LH side turn signal lights blink A
LH side turn signal lights do not blink B



A

9.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

B

11.CHECK REAR COMBINATION LIGHT ASSEMBLY LH
9.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH
a.

Remove the side turn signal light assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>SIDE TURN SIGNAL LIGHT ASSEMBLY>REMOVAL


b.

Inspect the side turn signal light assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>SIDE TURN SIGNAL LIGHT ASSEMBLY>INSPECTION


Result:
Proceed to
OK
NG



OK

10.CONFIRM MODEL

NG

REPLACE SIDE TURN SIGNAL LIGHT ASSEMBLY LH

10.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
w/o Power Retract Mirror A
w/ Power Retract Mirror B



A

REPLACE OUTER REAR VIEW MIRROR ASSEMBLY LH

B

REPLACE OUTER MIRROR RETRACTOR LH

11.CHECK REAR COMBINATION LIGHT ASSEMBLY LH
a.

Connect the O16 outer rear view mirror assembly LH*1 connector.


b.

Connect the O20 outer rear view mirror assembly LH*2 connector.


c.

Connect the O21 outer rear view mirror assembly LH*3 connector.


d.

Disconnect the W13 rear combination light assembly LH connector.


e.

Operate the headlight dimmer switch assembly and check that the LH side turn signal lights other than the rear turn signal light blink.

HINT:

If the LH side turn signal lights blink, the rear combination light assembly LH is malfunctioning.



*1: for 11 Pin Connector

*2: for 7 Pin Connector

*3: for 16 Pin Connector


Result:
Result Proceed to
LH side turn signal lights blink A
LH side turn signal lights do not blink B



A

12.CONFIRM MODEL

B

14.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY LH - COMBINATION METER ASSEMBLY)
12.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for LED Type Back-up Light A
for Bulb Type Back-up Light B



A

13.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

B

REPLACE REAR COMBINATION LIGHT SOCKET AND WIRE LH

13.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH
a.

Remove the rear combination light assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY>REMOVAL


b.

Inspect the rear combination light assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY>INSPECTION


Result:
Proceed to
OK
NG



OK

REPLACE REAR COMBINATION LIGHT CORD LH

NG

REPLACE REAR COMBINATION LIGHT ASSEMBLY LH

14.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY LH - COMBINATION METER ASSEMBLY)
a.

Disconnect the K20 combination meter assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
W13-3 (B) or K20-10 (TRNL) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

15.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY LH AND OUTER REAR VIEW MIRROR ASSEMBLY LH - COMBINATION METER ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

15.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY LH AND OUTER REAR VIEW MIRROR ASSEMBLY LH - COMBINATION METER ASSEMBLY)
a.

Disconnect the A76 headlight assembly LH*1 connector.


b.

Disconnect the A78 headlight assembly LH*2 connector.


c.

Disconnect the O16 outer rear view mirror assembly LH*3 connector.


d.

Disconnect the O20 outer rear view mirror assembly LH*4 connector.


e.

Disconnect the O21 outer rear view mirror assembly LH*5 connector.


f.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A76-1 (B)*1, A78-11 (TNS)*2, O16-10 (B)*3, O20-5 (B)*4 O21-16 (B)*5 or K20-11 (LL) - Body ground Always 10 kΩ or higher



*1: w/o Automatic Headlight Beam Level Control System

*2: w/ Automatic Headlight Beam Level Control System

*3: for 11 Pin Connector

*4: for 7 Pin Connector

*5: for 16 Pin Connector


Result:
Proceed to
OK
NG



OK

REPLACE COMBINATION METER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

16.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
w/ Automatic Headlight Beam Level Control System A
w/o Automatic Headlight Beam Level Control System B



A

17.CHECK HEADLIGHT ASSEMBLY RH

B

21.CHECK HEADLIGHT ASSEMBLY RH
17.CHECK HEADLIGHT ASSEMBLY RH
a.

Disconnect the A79 headlight assembly RH connector.


b.

Operate the headlight dimmer switch assembly and check that the RH side turn signal lights other than the headlight turn signal light blink.

HINT:

If the RH side turn signal lights blink, the headlight assembly RH is malfunctioning.



Result:
Result Proceed to
RH side turn signal lights blink A
RH side turn signal lights do not blink B



A

18.CHECK HEADLIGHT ECU SUB-ASSEMBLY RH

B

22.CHECK OUTER REAR VIEW MIRROR ASSEMBLY RH
18.CHECK HEADLIGHT ECU SUB-ASSEMBLY RH
E431889C02
5.604,0.323 5.906,0.531 0.302,0.208 2.24,0.188 2.594,0.427 0.354,0.24 1.219,0.302 1.646,0.813 true 3.146,0.865 3.458,0.323 true 5.323,0.979 5.083,0.385 true 6.052,1.104 6.448,0.385 true 0.094,0.115 0.406,0.313 0.313,0.198 10 false *a 5.708,0.333 6.021,0.531 0.313,0.198 10 false B 1.073,0.115 1.385,0.313 0.313,0.198 10 false TNS 3.354,0.146 3.667,0.344 0.313,0.198 10 false GND 4.875,0.198 5.406,0.417 0.531,0.219 10 false TURN+ 6.271,0.198 6.823,0.417 0.552,0.219 10 false TURN- 2.292,0.219 2.604,0.427 0.313,0.208 10 false A79
*a Component without harness connected
(Headlight ECU Sub-assembly RH)
- -


a.

Remove the headlight ECU sub-assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ECU>REMOVAL


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
B-9 (TURN+) - B-13 (TURN-)
or
A79-11 (TNS) - A79-12 (GND)
Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

19.CONFIRM MODEL

NG

REPLACE HEADLIGHT ECU SUB-ASSEMBLY RH

19.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for LED Type Turn Signal Light A
for Bulb Type Turn Signal Light B



A

20.INSPECT HEADLIGHT LENS RH

B

21.CHECK HEADLIGHT ASSEMBLY RH
a.

Disconnect the A75 headlight assembly RH connector.


b.

Operate the headlight dimmer switch assembly and check that the RH side turn signal lights other than the headlight turn signal light blink.

HINT:

If the RH side turn signal lights blink, the front turn signal light socket RH is malfunctioning.



Result:
Result Proceed to
RH side turn signal lights blink A
RH side turn signal lights do not blink B



A

B

22.CHECK OUTER REAR VIEW MIRROR ASSEMBLY RH
22.CHECK OUTER REAR VIEW MIRROR ASSEMBLY RH
a.

Connect the A75 headlight assembly RH*1 connector.


b.

Connect the A79 headlight assembly RH*2 connector.


c.

Disconnect the N17 outer rear view mirror assembly RH*3 connector.


d.

Disconnect the N18 outer rear view mirror assembly RH*4 connector.


e.

Disconnect the N19 outer rear view mirror assembly RH*5 connector.


f.

Operate the headlight dimmer switch assembly and check that the RH side turn signal lights other than the side turn signal light blink.

HINT:

If the RH side turn signal lights blink, the outer rear view mirror assembly RH is malfunctioning.



*1: w/o Automatic Headlight Beam Level Control System

*2: w/ Automatic Headlight Beam Level Control System

*3: for 16 Pin Connector

*4: for 7 Pin Connector

*5: for 11 Pin Connector


Result:
Result Proceed to
RH side turn signal lights blink A
RH side turn signal lights do not blink B



A

23.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

B

25.CHECK REAR COMBINATION LIGHT ASSEMBLY RH
23.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH
a.

Remove the side turn signal light assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>SIDE TURN SIGNAL LIGHT ASSEMBLY>REMOVAL


b.

Inspect the side turn signal light assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>SIDE TURN SIGNAL LIGHT ASSEMBLY>INSPECTION


Result:
Proceed to
OK
NG



OK

24.CONFIRM MODEL

NG

REPLACE SIDE TURN SIGNAL LIGHT ASSEMBLY RH

24.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
w/o Power Retract Mirror A
w/ Power Retract Mirror B



A

REPLACE OUTER REAR VIEW MIRROR ASSEMBLY RH

B

REPLACE OUTER MIRROR RETRACTOR RH

25.CHECK REAR COMBINATION LIGHT ASSEMBLY RH
a.

Connect the N17 outer rear view mirror assembly RH*1 connector.


b.

Connect the N18 outer rear view mirror assembly RH*2 connector.


c.

Connect the N19 outer rear view mirror assembly RH*3 connector.


d.

Disconnect the W12 rear combination light assembly RH connector.


e.

Operate the headlight dimmer switch assembly and check that the RH side turn signal lights other than the rear turn signal light blink.

HINT:

If the RH side turn signal lights blink, the rear combination light assembly RH is malfunctioning.



*1: for 16 Pin Connector

*2: for 7 Pin Connector

*3: for 11 Pin Connector


Result:
Result Proceed to
RH side turn signal lights blink A
RH side turn signal lights do not blink B



A

26.CONFIRM MODEL

B

28.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY RH - COMBINATION METER ASSEMBLY)
26.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for LED Type Back-up Light A
for Bulb Type Back-up Light B



A

27.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

B

REPLACE REAR COMBINATION LIGHT SOCKET AND WIRE RH

27.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH
a.

Remove the rear combination light assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY>REMOVAL


b.

Inspect the rear combination light assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY>INSPECTION


Result:
Proceed to
OK
NG



OK

REPLACE REAR COMBINATION LIGHT CORD RH

NG

REPLACE REAR COMBINATION LIGHT ASSEMBLY RH

28.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY RH - COMBINATION METER ASSEMBLY)
a.

Disconnect the K20 combination meter assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
W12-3 (B) or K20-13 (TRNR) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

29.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY RH AND OUTER REAR VIEW MIRROR ASSEMBLY RH - COMBINATION METER ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

29.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY RH AND OUTER REAR VIEW MIRROR ASSEMBLY RH - COMBINATION METER ASSEMBLY)
a.

Disconnect the A75 headlight assembly RH*1 connector.


b.

Disconnect the A79 headlight assembly RH*2 connector.


c.

Disconnect the N17 outer rear view mirror assembly RH*3 connector.


d.

Disconnect the N18 outer rear view mirror assembly RH*4 connector.


e.

Disconnect the N19 outer rear view mirror assembly RH*5 connector.


f.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A75-1 (B)*1, A79-11 (TNS)*2, N17-16 (B)*3, N18-5 (B)*4 N19-10 (B)*5 or K20-7 (LR) - Body ground Always 10 kΩ or higher



*1: w/o Automatic Headlight Beam Level Control System

*2: w/ Automatic Headlight Beam Level Control System

*3: for 16 Pin Connector

*4: for 7 Pin Connector

*5: for 11 Pin Connector


Result:
Proceed to
OK
NG



OK

REPLACE COMBINATION METER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR