16535
1.INSTALL LOWER RADIATOR SUPPORT
Install the 2 lower radiator supports to the radiator assembly.
16523A
2.INSTALL RADIATOR SUPPORT CUSHION
Install the 2 radiator support cushions to the radiator assembly.
16400
3.INSTALL RADIATOR ASSEMBLY
Engage the 2 guides.
Engage the 2 claws to install the fan with motor assembly to the radiator assembly.
Do not damage the radiator assembly when installing the fan with motor assembly.
Install the radiator assembly with the fan with motor assembly to the vehicle body.
Do not apply excessive force to the cooler condenser assembly or pipe when installing the radiator assembly with the fan with motor assembly.
Engage the 2 guides.
Engage the 2 claws to install the cooler condenser assembly to the radiator assembly.
Make sure not to damage the cooler condenser assembly when installing the cooler condenser assembly.
Engage the wire harness clamp.
Connect the cooling fan motor connector and rotate the lever to lock it.
When connecting the cooling fan motor connector, make sure that the connecting parts of the cooling fan motor connector are free of dirt, water or other foreign matter.
Be sure to securely connect the cooling fan motor connector.
Engage the wire harness clamp.
Connect the cooling fan motor connector.
Engage the 4 clamps to connect the wire harness to the fan with motor assembly.
G9227A
4.INSTALL NO. 3 INVERTER COOLING HOSE
Connect the No. 3 inverter cooling hose to the radiator assembly and slide the clip to secure it.
Engage the clamp to connect the No. 3 inverter cooling hose to the fan with motor assembly.
16572D
5.CONNECT NO. 2 RADIATOR HOSE
Connect the No. 2 radiator hose to the radiator assembly and slide the clip to secure it.
Engage the clamp to connect the No. 2 radiator hose to the fan with motor assembly.
G9226A
6.CONNECT NO. 2 INVERTER COOLING HOSE
Engage the clamp and connect the No. 2 inverter cooling hose to the fan with motor assembly.
G9229A
7.CONNECT NO. 5 INVERTER COOLING HOSE
Engage the 2 clamps and connect the No. 5 inverter cooling hose to the fan with motor assembly.
G9228A
8.CONNECT NO. 4 INVERTER COOLING HOSE
Connect the No. 4 inverter cooling hose to the radiator assembly and slide the clip to secure it.
16571C
9.CONNECT NO. 1 RADIATOR HOSE
Connect the No. 1 radiator hose to the radiator assembly and slide the clip to secure it.
Engage the clamp to connect the No. 1 radiator hose to the fan with motor assembly.
16283D
10.CONNECT NO. 6 WATER BY-PASS HOSE
Connect the No. 6 water by-pass hose to the radiator assembly.
16281F
11.CONNECT NO. 5 WATER BY-PASS HOSE
Connect the No. 5 water by-pass hose to the radiator assembly and slide the clip to secure it.
53205
12.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY
Install the upper radiator support sub-assembly with the 4 bolts.
Engage the clamp to connect the hood lock control cable assembly to the upper radiator support sub-assembly.
16593B
13.INSTALL NO. 1 RADIATOR AIR GUIDE RH (w/ Grille Shutter)
Engage the guide and claw.
Install the No. 1 radiator air guide RH with the clip.
16593B
14.INSTALL NO. 1 RADIATOR AIR GUIDE RH (w/o Grille Shutter)
Engage the guide and claw.
Install the No. 1 radiator air guide RH with the clip.
16595B
15.INSTALL NO. 1 RADIATOR AIR GUIDE LH (w/ Grille Shutter)
Engage the guide and claw.
Install the No. 1 radiator air guide LH with the clip.
16595B
16.INSTALL NO. 1 RADIATOR AIR GUIDE LH (w/o Grille Shutter)
Engage the guide and claw.
Install the No. 1 radiator air guide LH with the front radiator side air guide plate LH with the clip.
53253B
17.INSTALL UPPER RADIATOR MOUNTING BRACKET
Install the 2 upper radiator mounting brackets with the 2 bolts and 2 nuts.
w/ Vehicle Approaching Speaker Switch
Connect the 2 horn connectors.
Connect the vehicle approaching speaker assembly connector.
w/o Vehicle Approaching Speaker Switch
Connect the 2 horn connectors.
17750A
18.INSTALL INLET AIR CLEANER ASSEMBLY
53510
19.INSTALL HOOD LOCK ASSEMBLY
53019F
20.INSTALL RADIATOR SHUTTER SUB-ASSEMBLY
52131A
21.INSTALL FRONT BUMPER REINFORCEMENT
52611
22.INSTALL FRONT BUMPER ENERGY ABSORBER
23.INSTALL HEADLIGHT ASSEMBLY
for LED Type Turn Signal Light: Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY (for LED Type Turn Signal Light)>INSTALLATION
for Bulb Type Turn Signal Light: Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ASSEMBLY (for Bulb Type Turn Signal Light)>INSTALLATION
G9040
24.INSTALL INVERTER WATER PUMP ASSEMBLY
25.ADD ENGINE COOLANT (for Engine)
26.INSPECT FOR COOLANT LEAK (for Engine)
27.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY (w/ Cover)
51441
28.INSTALL NO. 1 ENGINE UNDER COVER
53852K
29.INSTALL FRONT WHEEL OPENING EXTENSION PAD LH
53851M
30.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH