Home › Engine / Hybrid System › N04C-UH (ENGINE CONTROL) › ECD SYSTEM
RM2850E _51 Engine / Hybrid System _073137 N04C-UH ENGINE CONTROL _0355844 ECD SYSTEM L

N04C-UH ENGINE CONTROL  ECD SYSTEM  PRECAUTION  


NOTICE:
·

Replace the ECM and/or injector assembly after the following operations

Replacement part Operation
ECM Input Injector Compensation Code (Click here(Click here))
VIN Code Registration (Click here(Click here))
Supply Pump Initialization (Click here(Click here))
Diesel Throttle Body Initialization (Click here(Click here))
Injector Assembly Input Injector Compensation Code (Click here(Click here))
Supply Pump Supply Pump Initialization (Click here(Click here))

·

When disconnecting the negative (-) battery cable, perform the Diesel Throttle Body Initialization (Click hereEngine / Hybrid System>N04C-UH (ENGINE CONTROL)>ECD SYSTEM>INITIALIZATION) after the terminal is reconnected.



INJECTOR COMPENSATION CODE


HINT:
·

Each injector has different fuel injection characteristics. In order to optimize fuel injection performance, the ECM compensates for these differences by adjusting the fuel injection duration of each injector assembly according to its compensation code. Injector compensation codes are printed on the head portion of each injector assembly.

·

If an incorrect injector compensation code is input into the ECM, the engine may rattle or engine idling may become rough. In addition, engine failure may occur and the life of the engine may be shortened.



a.
A288762E09
2.344,1.688 2.552,0.76 true 0.094,0.052 1.323,0.25 1.229,0.198 10 false *a 2.271,1.719 2.719,1.927 0.448,0.208 10 false *b

When an injector assembly is replaced, the injector's compensation code must be input into the ECM (Click hereEngine / Hybrid System>N04C-UH (ENGINE CONTROL)>ECD SYSTEM>REGISTRATION).

NOTICE:

Although some injectors are marked with a 32-digit alphanumeric value, only the first 30-digits must to be input.



b.

When the ECM is changed, all of the existing injector compensation codes must be input into the new ECM (Click hereEngine / Hybrid System>N04C-UH (ENGINE CONTROL)>ECD SYSTEM>REGISTRATION).

Text in Illustration
*a Example
*b Injector Compensation Code



DIFFICULT TO START ENGINE, ENGINE STALLING, OR BLACK SMOKE EMITTED


a.

Check if the customer's problem is described below. If so, refer to the troubleshooting section on the page given.





FOR USING INTELLIGENT TESTER


CAUTION:

Observe the following items for safety reasons:

·

Before using the tester, read its instruction manual.

·

Prevent the tester cable from being caught on the pedals, shift lever or steering wheel when driving with the tester connected to the vehicle.

·

When driving the vehicle for testing purposes using the tester, two persons are required. One is for driving the vehicle, and the other operates the tester.