Home › Vehicle Interior › AIR CONDITIONING › COMPRESSOR AND MAGNETIC CLUTCH(for 2TR-FE)
RM2850E _58 Vehicle Interior _073207 AIR CONDITIONING _0356291 COMPRESSOR AND MAGNETIC CLUTCH(for 2TR-FE) A

AIR CONDITIONING  COMPRESSOR AND MAGNETIC CLUTCH(for 2TR-FE)  REMOVAL  


PROCEDURE

Hide 1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 58734B 3.REMOVE REAR ENGINE SERVICE COVER WEATHERSTRIP

Hide 58123A 6.REMOVE SHIFT AND SELECT LEVER SUPPORT WITH BOOTS

Hide 33503F 7.REMOVE FLOOR SHIFT SHIFT LEVER ASSEMBLY

Hide 58701A 8.REMOVE FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY

Hide 51441 9.REMOVE NO. 1 ENGINE UNDER COVER

Hide 88310A 10.REMOVE V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT

Hide 88711 11.DISCONNECT COOLER REFRIGERANT NO. 1 DISCHARGE HOSE

a.
E156339

Remove the bolt and disconnect the discharge hose.


b.

Remove the O-ring from the discharge hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.



Hide 88712 12.DISCONNECT COOLER REFRIGERANT NO. 1 SUCTION HOSE

a.
E156340

Remove the bolt and disconnect the suction hose.


b.

Remove the O-ring from the suction hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.



Hide 13.SEPARATE COMPRESSOR AND MAGNETIC CLUTCH

a.
E156341

Disconnect the connector.


b.

Remove the 4 bolts and the compressor.