77377
1.INSTALL FUEL FILLER OPENING LID LOCK RETAINER
Install the fuel filler opening lid lock retainer in the direction shown in the illustration to install it.
77035
2.INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY
Attach the 3 clips in the illustration.
Attach the 6 clamps as shown in the illustration.
Align the marking tape with the positions on theclamp.
| *a | Clip | *b | Clamp |
| *c | Marking Tape | - | - |
| *a | Clip | *b | Clamp |
Attach the 2 claws in the illustration to install the fuel lid lock control cable sub-assembly.
62625C
3.INSTALL NO. 5 SIDE TRIM BOARD LH
62623C
4.INSTALL NO. 3 SIDE TRIM BOARD LH
62621C
5.INSTALL NO. 1 SIDE TRIM BOARD LH
62672
6.INSTALL NO. 1 SIDE TRIM BOARD COVER LH
62526G
7.INSTALL NO. 4 SIDE TRIM BASE COVER LH
62526D
8.INSTALL NO. 2 SIDE TRIM BASE COVER LH
62516C
9.INSTALL NO. 1 SIDE TRIM BASE COVER LH
62414A
10.INSTALL CENTER LOWER PILLAR GARNISH LH
73220
11.CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH
58651A
12.INSTALL FRONT NO. 1 DOOR MAT PLATE
46243
13.INSTALL PARKING BRAKE LEVER COVER
77306
14.INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY