Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for the RHD vehicles.
1.DRAIN ENGINE COOLANT (for 1HZ)
2.DRAIN ENGINE COOLANT (for 2TR-FE)
3.DRAIN ENGINE COOLANT (for N04C-UH, N04C-VL, N04C-VQ, N04C-WA)
for N04C-UH:
Click hereEngine / Hybrid System>N04C-UH (COOLING)>COOLANT>REPLACEMENT
for N04C-VL:
Click hereEngine / Hybrid System>N04C-VL (COOLING)>COOLANT>REPLACEMENT
for N04C-VQ:
Click hereEngine / Hybrid System>N04C-VQ (COOLING)>COOLANT>REPLACEMENT
for N04C-WA:
Click hereEngine / Hybrid System>N04C-WA (COOLING)>COOLANT>REPLACEMENT
4.REMOVE REAR SEAT ASSEMBLY RH
for 2-Passenger Seat with Separate Type Seatback:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 2-Passenger Seat with Separate Type Seatback)>REMOVAL
for 2-Passenger Seat with Bench Type Seatback:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 2-Passenger Seat with Bench Type Seatback)>REMOVAL
for Single-Passenger Seat with 3 Point Type Seat Belt:
for Single-Passenger Seat without 3 Point Type Seat Belt:
5.REMOVE REAR SEAT ASSEMBLY LH
for 2-Passenger Seat with Separate Type Seatback:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 2-Passenger Seat with Separate Type Seatback)>REMOVAL
for 2-Passenger Seat with Bench Type Seatback:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 2-Passenger Seat with Bench Type Seatback)>REMOVAL
for Single-Passenger Seat with 3 Point Type Seat Belt:
for Single-Passenger Seat without 3 Point Type Seat Belt:
87209
6.DISCONNECT WATER HOSE SUB-ASSEMBLY (for Front Side, RHD)
|
Bolt |
|
Clamp |
|
Connector |
Type A:
Remove the bolt.
Detach the guide.
Disconnect the connector.
Slide the 2 clamps and disconnect the 2 water hoses.
Do not apply excessive force to the water hose and rear heater unit sub-assembly of water hose.
Prepare a drain pan or cloth in case the coolant leaks.
|
Clamp |
|
Connector |
Type B:
Disconnect the connector.
Slide the 2 clamps and disconnect the 2 water hoses.
Do not apply excessive force to the water hose and rear heater unit sub-assembly of water hose.
Prepare a drain pan or cloth in case the coolant leaks.
87209
7.DISCONNECT WATER HOSE SUB-ASSEMBLY (for Front Side, LHD)
|
Clamp |
|
Connector |
Disconnect the connector.
Slide the 2 clamps and disconnect the 2 water hoses.
Do not apply excessive force to the water hose and rear heater unit sub-assembly of water hose.
Prepare a drain pan or cloth in case the coolant leaks.
87209
8.DISCONNECT WATER HOSE SUB-ASSEMBLY (for Rear Side, RHD)
|
Clamp |
|
Connector |
Disconnect the connector.
Slide the 2 clamps and disconnect the 2 water hoses.
Do not apply excessive force to the water hose and rear heater unit sub-assembly of water hose.
Prepare a drain pan or cloth in case the coolant leaks.
87209
9.DISCONNECT WATER HOSE SUB-ASSEMBLY (for Rear Side, LHD)
|
Clamp |
|
Connector |
Disconnect the connector.
Slide the 2 clamps and disconnect the 2 water hoses.
Do not apply excessive force to the water hose and rear heater unit sub-assembly of water hose.
Prepare a drain pan or cloth in case the coolant leaks.
87120
10.REMOVE REAR HEATER ASSEMBLY
for Front Side:
Remove the 3 bolts and rear heater assembly.
|
Bolt |
|
Nut |
for Rear Side:
Remove the 2 bolts, nut and rear heater assembly.