89463A
1.REMOVE NITROGEN OXIDES SENSOR
89425
2.REMOVE EXHAUST GAS TEMPERATURE SENSOR
3.DRAIN ENGINE COOLANT
17430
4.REMOVE EXHAUST TAILPIPE ASSEMBLY
Remove the 2 bolts and 2 compression springs.
Remove the 4 nuts and exhaust tailpipe assembly.
Remove the gasket.
17420
5.REMOVE CENTER EXHAUST PIPE ASSEMBLY
Slide the 4 hose clips and remove the 2 air hoses from the differential pressure sensor and center exhaust pipe assembly.
Remove the 4 hose clips from the 2 air hoses.
Remove the 2 bolts and 2 compression springs.
Remove the 4 nuts and center exhaust pipe assembly.
Remove the gasket from the front No. 2 exhaust pipe sub-assembly.
17402
6.REMOVE FRONT NO. 2 EXHAUST PIPE SUB-ASSEMBLY
Remove the 3 bolts and front No. 2 exhaust pipe sub-assembly.
Remove the gasket from the front exhaust pipe assembly.
7.REMOVE NO. 3 TURBO INSULATOR
16028
8.DISCONNECT NO. 2 TURBO WATER PIPE SUB-ASSEMBLY
19971G
9.REMOVE VACUUM PIPE
Disconnect the 2 vacuum hoses.
Remove the 2 bolts and vacuum pipe.
23811H
10.DISCONNECT NO. 1 FUEL PIPE
17410
11.REMOVE FRONT EXHAUST PIPE ASSEMBLY
| *1 | Clamp |
| *2 | No. 1 Exhaust Pipe Support Bracket |
Remove the clamp bolt and clamp from the No. 1 exhaust pipe support bracket.
| *1 | Gasket |
| *2 | Spacer |
Remove the bolt, 2 nuts, 3 spacers and front exhaust pipe assembly.
Remove the gasket.
87378C
12.REMOVE EXHAUST PIPE