Home › Engine / Hybrid System › 2AZ-FE ENGINE CONTROL › ENGINE COOLANT TEMPERATURE SENSOR
RM24M0E _51 Engine / Hybrid System _059541 2AZ-FE ENGINE CONTROL _0291790 ENGINE COOLANT TEMPERATURE SENSOR A

2AZ-FE ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


Hide 85110 3.REMOVE COWL TOP OUTER PANEL WITH WINDSHIELD WIPER MOTOR AND LINK

a.

Remove the cowl top outer panel with windshield wiper motor and link (see page Vehicle Interior>WIPER / WASHER>FRONT WIPER MOTOR>REMOVAL).


Hide 89422 6.REMOVE ENGINE COOLANT TEMPERATURE SENSOR

a.
A095412E05
1.656,0.583 1.552,0.896 false 1.938,3.01 2.208,2.875 true 1.156,0.938 1.802,1.135 0.646,0.198 10 false Gasket 1.531,2.958 1.833,3.135 0.302,0.177 10 true SST

Disconnect the sensor connector.


b.

Using SST, remove the sensor and gasket.

SST
09817-33190