16711
1.INSTALL FAN SHROUD WITH FAN MOTOR
Install the fan shroud with fan motor to the radiator with the 2 bolts.
16400
2.INSTALL RADIATOR ASSEMBLY WITH FAN SHROUD AND FAN MOTOR
Install the 2 lower radiator support cushions.
Install the radiator with fan shroud and fan motor.
Install the 4 fan shroud cushions to the cooler condenser.
Attach the cooler condenser to the radiator.
16712
3.INSTALL NO. 2 FAN SHROUD
Install the No. 2 fan shroud with the 2 bolts.
53205
4.INSTALL RADIATOR UPPER SUPPORT SUB-ASSEMBLY
Install the support with wire harness with the 4 bolts.
Install the wire ground cable's bolt to the radiator support LH side.
Attach the wire harness's clamp to the radiator support LH side.
17751
5.INSTALL NO. 1 AIR CLEANER INLET
Install the inlet with the clip.
16533
6.INSTALL RADIATOR SUPPORT UPPER BRACKET
Install the 2 brackets with the 4 bolts.
53209B
7.INSTALL HOOD LOCK SUPPORT BRACE SUB-ASSEMBLY
Install the hood lock support brace sub-assembly with the 2 bolts.
Connect the 3 wire harness clamps to the hood lock support brace sub-assembly.
8.CONNECT COOLING FAN MOTOR CONNECTOR
Attach the claw.
Connect the No. 1 and No. 2 fan motor connectors.
16268
9.INSTALL NO. 1 WATER BY-PASS PIPE
Install the pipe with the 2 bolts.
Connect the No. 1 water by-pass hose to the reservoir, and attach the clamp to the radiator support.
Connect the No. 3 water by-pass hose to the radiator.
| *1 | No. 1 Water By-Pass Hose | *2 | No. 1 Water By-Pass Pipe |
| *3 | No. 3 Water By-Pass Hose | - | - |
81150
10.INSTALL HEADLIGHT ASSEMBLY (except LED Headlight)
Install the headlight assembly (see page Vehicle Interior>LIGHTING>HEADLIGHT ASSEMBLY(except LED Headlight)>INSTALLATION).
81150
11.INSTALL HEADLIGHT ASSEMBLY (for LED Headlight)
Install the headlight assembly (see page Vehicle Interior>LIGHTING>HEADLIGHT ASSEMBLY(for LED Headlight)>INSTALLATION).
32921
12.CONNECT NO. 1 OIL COOLER INLET TUBE (w/ Oil Cooler)
Connect the oil cooler hose inlet and outlet to the radiator.
Install the tube to the radiator with the 3 bolts.
16572D
13.CONNECT NO. 2 RADIATOR HOSE
16571C
14.CONNECT NO. 1 RADIATOR HOSE
Connect the radiator hose to the radiator, engine and No. 1 water by-pass pipe.
28800
15.INSTALL BATTERY
74404B
16.INSTALL BATTERY CLAMP SUB-ASSEMBLY
Install the battery clamp with the bolt and nut.
for bolt
for nut
Connect the cable to the positive (+) battery terminal.
17.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
18.ADD ENGINE COOLANT
19.INSPECT FOR COOLANT LEAK
51441
20.INSTALL NO. 1 ENGINE UNDER COVER
21.PERFORM INITIALIZATION
Perform initialization (see page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.