Home › Engine / Hybrid System › 2GR-FE IGNITION › IGNITION COIL AND SPARK PLUG
RM24M0E _51 Engine / Hybrid System _059555 2GR-FE IGNITION _0291864 IGNITION COIL AND SPARK PLUG A

2GR-FE IGNITION  IGNITION COIL AND SPARK PLUG  REMOVAL  


PROCEDURE

Hide 1. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM (for LHD)

Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 51442 3.REMOVE NO. 2 ENGINE UNDER COVER

Hide 85291B 6.REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH

Hide 85291A 7.REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH

Hide 53867H 8.REMOVE FRONT FENDER TO COWL SIDE SEAL LH

Hide 53866J 9.REMOVE FRONT FENDER TO COWL SIDE SEAL RH

Hide 55781F 10.REMOVE COWL TOP VENTILATOR LOUVER

Hide 47202 11.REMOVE BRAKE MASTER CYLINDER RESERVOIR BRACKET

Hide 55712 12.REMOVE FRONT COWL TOP OUTSIDE PANEL WITH WINDSHIELD WIPER MOTOR AND LINK

Hide 17190 15.REMOVE INTAKE AIR SURGE TANK ASSEMBLY

Hide 17125 16.REMOVE NO. 1 SURGE TANK STAY

a.
A162505

Remove the bolt and disconnect the harness clamp.


b.
A134967

Remove the bolt and No. 1 surge tank stay.


Hide 19500 17.REMOVE IGNITION COIL ASSEMBLY (for LHD)

a.
A160388E02
0.063,0.063 0.823,0.479 0.76,0.417 10 true LH Bank: 0.063,2.375 0.823,2.646 0.76,0.271 10 true RH Bank:

Disconnect the 5 ignition coil connectors.


b.

Remove the 5 bolts and 5 ignition coils.


Hide 88710E 18.REMOVE AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY (for LHD)

a.
A161849E02
1.198,0.854 2.188,0.854 false 2.24,0.781 2.604,0.958 0.365,0.177 10 false Plate

Remove the bolt.


b.

Remove the plate as shown in the illustration.


c.

Disconnect the air conditioning tube and accessory assembly and position it as shown in the illustration.

A394011E01
5.448,1.448 6.458,2.021 1.01,0.573 10 false Disconnect tube by hand

NOTICE:
·

Do not use a screwdriver or similar tool to disconnect the tube.

·

Seal the opening of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.




d.

Remove the O-rings from the air conditioning tube and accessory assembly.


Hide 19500 19.REMOVE IGNITION COIL ASSEMBLY (for LHD)

a.
A161851E01
0.062,0 0.769,0.202 0.707,0.202 10 RH Bank:

Disconnect the ignition coil connector and remove the bolt.


b.
A162509

Rotate the ignition coil to remove it.


Hide 19500 20.REMOVE IGNITION COIL ASSEMBLY (for RHD)

a.
A134966E03
0.135,0.094 0.802,0.458 0.667,0.365 10 true LH Bank: 0.135,2.292 0.792,2.635 0.656,0.344 10 true RH Bank:

Disconnect the 6 ignition coil connectors.


b.

Remove the 6 bolts and 6 ignition coils.


Hide 19100P 21.REMOVE SPARK PLUG

a.
A137604

Remove the 6 spark plugs.