Home › Brake › BRAKE › BRAKE PEDAL › from 2016.05
RM24M0E _54 Brake _059558 BRAKE _0291874 BRAKE PEDAL A

BRAKE  BRAKE PEDAL  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

CAUTION:

Be sure to read "PRECAUTION" thoroughly before servicing (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at for 90 seconds after disconnecting the cable to prevent airbag deployment.


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 55302A 3.REMOVE UPPER INSTRUMENT PANEL

a.

Remove the upper instrument panel (see page Vehicle Interior>INTERIOR PANEL>UPPER INSTRUMENT PANEL>REMOVAL).


Hide 55312 4.REMOVE LOWER INSTRUMENT PANEL

a.

Remove the lower instrument panel (see page Vehicle Interior>INTERIOR PANEL>LOWER INSTRUMENT PANEL>REMOVAL).


Hide 5.DISCONNECT CONNECTOR

a.

Disconnect the stop light switch connector.


b.

Disconnect the brake pedal load sensing switch connector.


Hide 84340 6.REMOVE STOP LIGHT SWITCH ASSEMBLY

a.

Turn the switch counterclockwise and remove it.


Hide 47264A 7.REMOVE PUSH ROD PIN

a.

Remove the clip from the push rod pin.


b.

Remove the push rod pin from the push rod clevis.


Hide 47110 8.REMOVE BRAKE PEDAL SUPPORT ASSEMBLY

a.
C158085E02
2.552,0.813 2.031,0.281 2.031,0.281 1.833,0.281 false 2.292,2.073 2.51,2.281 2.51,2.281 2.51,2.646 true 0.76,0.208 1.854,0.563 1.094,0.354 10 false Instrument Panel Reinforcement 1.938,2.677 3.26,2.854 1.323,0.177 10 false Brake Pedal Support

Remove the bolt from the support.


b.
C158086

Remove the 4 nuts and support.