Home › Brake › PARKING BRAKE › PARKING BRAKE CABLE › 2013.04–2016.05
RM24M0E _54 Brake _059559 PARKING BRAKE _0291887 PARKING BRAKE CABLE A

PARKING BRAKE  PARKING BRAKE CABLE  INSTALLATION  


PROCEDURE

Hide 46430 1.INSTALL PARKING BRAKE CABLE ASSEMBLY

C133387E04
2.75,0.958 2.917,1.156 0.167,0.198 10 false E 1.385,3.469 1.552,3.667 0.167,0.198 10 true H 6.469,4.708 6.635,4.906 0.167,0.198 10 true G 2.479,0.438 2.646,0.635 0.167,0.198 10 false E 2.156,1.167 2.323,1.365 0.167,0.198 10 false D 2.917,0.177 3.083,0.375 0.167,0.198 10 false C 6.479,3.365 6.646,3.563 0.167,0.198 10 false B 6.583,1.792 6.75,1.99 0.167,0.198 10 true A 2.833,4.625 2.979,4.792 0.146,0.167 10 true F

a.

Install the No. 2 parking brake cable as follows.

i.

Install the clamp and clamp bolt (labeled A) to the beam bracket.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

NOTICE:

Securely install the clamp.



ii.

Install the clamp and clamp bolt (labeled B) to the beam bracket.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

NOTICE:

Securely install the clamp.



iii.

Install the parking brake cable guide RH (labeled C) to the crossmember.

NOTICE:

Securely install the cable guide to the crossmember.



iv.

Install the clamp and parking brake cable No. 1 support bracket (labeled D) to the crossmember with the 2 clamp bolts (labeled E).

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

NOTICE:

Securely install the clamp.




b.

Install the No. 3 parking brake cable as follows.

i.

Install the clamp and clamp bolt (labeled F) to the beam bracket.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

NOTICE:

Securely install the clamp.



ii.

Install the clamp and clamp bolt (labeled G) to the beam bracket.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

NOTICE:

Securely install the clamp.



iii.

Install the clamp and clamp bolt (labeled H) to the crossmember.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

NOTICE:

Securely install the clamp.




Hide 46356 2.INSTALL EQUALIZER SUPPORT BRACKET

a.
C367462E01
1.542,0.135 1.698,0.333 0.156,0.198 10 false A 1.583,1.063 1.74,1.26 0.156,0.198 10 false B 2.135,1.958 2.292,2.156 0.156,0.198 10 false C 2.948,0.896 3.104,1.094 0.156,0.198 10 false B 2.385,0.167 2.531,0.344 0.146,0.177 10 true C

Install the bracket (labeled A) to the body with the 2 bolts (labeled B).

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


b.

Install the No. 2 and No. 3 parking brake cables to the bracket with the 2 bolts (labeled C).

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)

NOTICE:

Securely install the cables to the bracket.



Hide 46341 3.INSTALL PARKING BRAKE EQUALIZER

a.
C367614

Connect the 3 cable ends to the equalizer.


Hide 46430 4.CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY

a.

Pass the cable through the backing plate, and then connect the cable to the parking brake shoe lever.


b.
C133386

Install the cable to the backing plate with the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 46420 5.CONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY

HINT:

Use the same procedures described for the No. 3 cable.


Hide 42431 6.INSTALL REAR DISC

Hide 7.INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH

Hide 8.ADJUST PARKING BRAKE SHOE CLEARANCE

Hide 9.INSTALL REAR WHEEL

T = 103 N*m{ 1,050 kgf*cm 76 ft.*lbf }

Hide 10.ADJUST PARKING BRAKE PEDAL TRAVEL

Hide 55432B 11.INSTALL INSTRUMENT PANEL FINISH PANEL LOWER (w/ Knee Airbag)

Hide 55432B 12.INSTALL INSTRUMENT PANEL FINISH PANEL LOWER (w/o Knee Airbag)

Hide 55606 13.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 62112 14.INSTALL COWL SIDE TRIM BOARD LH (for LHD)

Hide 62111C 15.INSTALL COWL SIDE TRIM BOARD RH (for RHD)

Hide 67914B 16.INSTALL FRONT DOOR SCUFF PLATE LH (for LHD)

Hide 67913B 17.INSTALL FRONT DOOR SCUFF PLATE RH (for RHD)