Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (see page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION).
28800
1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
45130
2.REMOVE STEERING PAD ASSEMBLY
3.PLACE FRONT WHEELS FACING STRAIGHT AHEAD
45100
4.REMOVE STEERING WHEEL ASSEMBLY
45286
5.REMOVE STEERING COLUMN COVER
84306
6.REMOVE SPIRAL CABLE WITH STEERING ANGLE SENSOR
Disconnect the connectors from the spiral cable with steering angle sensor.
When handling the airbag connector, take care not to damage the airbag wire harness.
Detach the 3 claws and remove the spiral cable with steering angle sensor.
84306
7.REMOVE SPIRAL CABLE
Detach the 6 claws and remove the spiral cable.