Be sure to read the precautionary notices concerning the SRS airbag system before servicing it (see page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION).
28800
1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2.REMOVE FRONT SEAT ASSEMBLY LH
for Manual Seat:
Remove the front seat (see page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>REMOVAL).
for Power Seat:
Remove the front seat (see page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>REMOVAL).
3.REMOVE CENTER FLOOR AIRBAG SENSOR COVER
Detach the 2 claws to remove the sensor cover.
4.REMOVE CENTER FLOOR AIRBAG SENSOR
Disconnect the sensor connector.
Remove the bolt and sensor.
Remove the clip.