Use the same procedures for the RH side and LH side.
The procedures listed below are for the LH side.
28800
1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2.REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)
3.REMOVE FRONT SEAT ASSEMBLY (for Power Seat)
71862
4.REMOVE FRONT SEAT CUSHION SHIELD INNER (for Manual Seat)
84921A
5.REMOVE RECLINING POWER SEAT SWITCH KNOB (for Power Seat)
84921B
6.REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for Power Seat)
71812D
7.REMOVE FRONT SEAT CUSHION SHIELD (for Power Seat)
73240
8.REMOVE FRONT SEAT INNER BELT ASSEMBLY
Remove the clips and connectors.
Remove the nut and seat belt.