1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
67913B
2.REMOVE FRONT DOOR SCUFF PLATE RH
62111C
3.REMOVE COWL SIDE TRIM BOARD RH
55607
4.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
55550
5.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
88650E
6.REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
89940
7.REMOVE AFS ECU
Remove the 2 nuts.
Disconnect the ECU connector and remove the ECU.