Home › Vehicle Interior › WIPER / WASHER › WASHER MOTOR › 2013.04–2016.05
RM24M0E _58 Vehicle Interior _059565 WIPER / WASHER _0291973 WASHER MOTOR A

WIPER / WASHER  WASHER MOTOR  INSTALLATION  


PROCEDURE

Hide 85310A 1.INSTALL HEADLIGHT CLEANER WASHER MOTOR AND PUMP ASSEMBLY

B133950

a.

Install the headlight cleaner motor and pump to the packing of the washer jar.


Hide 85310R 2.INSTALL REAR WASHER MOTOR ASSEMBLY

B133126

a.

Install the windshield washer motor and pump to the packing of the washer jar.


Hide 85310 3.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

B462628

a.

Install the windshield washer motor and pump to the packing of the washer jar.


Hide 85331 4.INSTALL WINDSHIELD WASHER JAR SUB-ASSEMBLY

a.
B140253

w/ Headlight Cleaner:

i.

Install the windshield washer jar and pump with the 3 bolts.


ii.

Connect all the connectors.



b.
B140252

w/o Headlight Cleaner:

i.

Install the windshield washer jar and pump with the 3 bolts.


ii.

Connect all the connectors.



c.
B140256

Install the washer inlet of the washer jar and pump to the windshield washer jar and pump.


d.
B140257

Install the washer inlet of the washer jar and pump with the clip.


Hide 5.FILL UP WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID

a.

Connect the washer hoses to the washer motor and pump, and fill the washer jar with washer fluid.


Hide 6.INSTALL FRONT BUMPER ASSEMBLY

Hide 7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 8.PERFORM INITIALIZATION

a.

Perform initialization (see page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.