85310A
1.INSTALL HEADLIGHT CLEANER WASHER MOTOR AND PUMP ASSEMBLY
Install the headlight cleaner motor and pump to the packing of the washer jar.
85310R
2.INSTALL REAR WASHER MOTOR ASSEMBLY
Install the windshield washer motor and pump to the packing of the washer jar.
85310
3.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
Install the windshield washer motor and pump to the packing of the washer jar.
85331
4.INSTALL WINDSHIELD WASHER JAR SUB-ASSEMBLY
w/ Headlight Cleaner:
Install the windshield washer jar and pump with the 3 bolts.
Connect all the connectors.
w/o Headlight Cleaner:
Install the windshield washer jar and pump with the 3 bolts.
Connect all the connectors.
Install the washer inlet of the washer jar and pump to the windshield washer jar and pump.
Install the washer inlet of the washer jar and pump with the clip.
5.FILL UP WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID
Connect the washer hoses to the washer motor and pump, and fill the washer jar with washer fluid.
6.INSTALL FRONT BUMPER ASSEMBLY
for Sport Package: (See page Vehicle Interior>EXTERIOR>FRONT BUMPER(for Sport Package)>INSTALLATION)
for Standard: (See page Vehicle Interior>EXTERIOR>FRONT BUMPER(for Standard)>INSTALLATION)
7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8.PERFORM INITIALIZATION
Perform initialization (see page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.