Home › Drivetrain › K112 (CVT) › OIL COOLER › 2013.04–2016.05
RM24M0E _52 Drivetrain _059572 K112 CVT _0292049 OIL COOLER A

K112 CVT  OIL COOLER  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT WHEEL LH

Hide 53702 2.REMOVE FRONT FENDER APRON LH

Hide 51441 3.REMOVE NO. 1 ENGINE UNDER COVER

Hide 5.DRAIN CONTINUOUSLY VARIABLE TRANSAXLE FLUID

Hide 53292A 6.REMOVE UPPER RADIATOR SUPPORT SEAL

Hide 16571 7.DISCONNECT NO. 1 RADIATOR HOSE

Hide 8.DISCONNECT WATER BY-PASS HOSE (w/o Air Cooled Transmission Oil Cooler)

a.
C189755

Disconnect the clamp from the water by-pass hose.


b.
C225340

Release the 2 clamps and disconnect the 2 water by-pass hoses from the oil cooler.


Hide 9.DISCONNECT WATER BY-PASS HOSE (w/ Air Cooled Transmission Oil Cooler)

a.
C264701

Release the 2 clamps and disconnect the 2 water by-pass hoses from the oil cooler.


Hide 10.REMOVE OIL COOLER HOSE (w/o Air Cooled Transmission Oil Cooler)

a.
C225348

Release the 4 clamps and remove the 2 oil cooler hoses from the oil cooler and continuously variable transaxle assembly.


b.

Remove the 4 clamps from the 2 oil cooler hoses.


Hide 11.REMOVE OIL COOLER HOSE (w/ Air Cooled Transmission Oil Cooler)

a.
C264774

Release the 2 clamps and disconnect the 2 oil cooler hoses from the oil cooler tube sub-assembly.


b.
C264702

Release the 4 clamps and remove the 2 oil cooler hoses from the oil cooler and continuously variable transaxle assembly.


c.
C264703E02
1.375,0.792 1.563,0.792 false 2.594,0.875 2.76,0.875 false 0.906,1.135 1.104,1.135 false 2.885,1.094 3.083,1.094 false 2.917,1.646 3.115,1.646 false 1.031,1.823 0.698,1.823 false 0.885,2.094 0.885,1.823 false 2.802,1.417 2.302,1.417 false 2.521,1.615 2.521,1.417 false 3.125,1.938 3.021,1.938 false 3.302,2.625 3.302,2.354 false 0.146,2.448 0.146,3.073 0.146,3.073 0.323,3.073 false 0.406,2.615 0.406,2.813 0.406,2.813 0.583,2.813 false 1.354,2.833 1.354,3.021 1.354,3.021 1.521,3.021 false 2.281,1.771 2.281,1.958 2.281,1.958 2.458,1.958 false 3.073,2.438 3.073,2.625 3.073,2.625 2.854,2.625 false 1.406,2.188 1.667,1.938 1.667,1.938 1.813,1.938 false 1.198,1.927 1.458,1.677 1.458,1.677 1.615,1.677 false 1.667,2.26 1.667,1.938 false 1.635,2.708 1.938,2.708 false 1.563,0.698 1.75,0.854 0.188,0.156 10 false *4 2.406,0.792 2.594,0.948 0.188,0.156 10 false *4 0.51,1.74 0.677,1.885 0.167,0.146 10 false *4 0.344,3 0.51,3.146 0.167,0.146 10 false *4 1.115,1.042 1.292,1.198 0.177,0.156 10 false *1 3.094,1.01 3.271,1.167 0.177,0.156 10 false *2 3.125,1.563 3.302,1.719 0.177,0.156 10 false *3 1.625,1.594 1.802,1.75 0.177,0.156 10 false *3 1.833,1.865 2.01,2.021 0.177,0.156 10 false *4 2.115,1.344 2.281,1.49 0.167,0.146 10 false *4 3.125,1.854 3.292,2 0.167,0.146 10 false *4 3.208,2.646 3.375,2.792 0.167,0.146 10 false *4 0.594,2.729 0.76,2.875 0.167,0.146 10 false *1 1.542,2.938 1.708,3.083 0.167,0.146 10 false *1 1.938,2.625 2.104,2.771 0.167,0.146 10 false *4 2.469,1.875 2.635,2.021 0.167,0.146 10 false *2 2.667,2.552 2.833,2.698 0.167,0.146 10 false *2

Release the 3 clamps and remove the 3 inlet oil cooler hoses from the outlet oil cooler tube.

Text in Illustration
*1 Outlet No. 1 Oil Cooler Hose
*2 Inlet Oil Cooler Hose
*3 Outlet Oil Cooler Tube
*4 Clamp


d.

Remove the 6 clamps from the 3 inlet oil cooler hoses.


e.

Release the 3 clamps and remove the 3 outlet No. 1 oil cooler hoses from the outlet oil cooler tube.


f.

Remove the 6 clamps from the 3 outlet No. 1 oil cooler hoses.


Hide 33493B 12.REMOVE OIL COOLER

a.
C225341

Remove the 3 bolts and oil cooler from the continuously variable transaxle assembly.