87130D
1.INSTALL BLOWER UNIT ASSEMBLY
w/o PTC Heater:
Install the blower unit with the 2 screws.
w/ PTC Heater:
Install the blower unit with the 3 screws.
w/ PTC Heater:
Connect the clamp.
Connect the connector.
2.INSTALL AIR CONDITIONING UNIT ASSEMBLY
Install the air conditioning unit (See page Vehicle Interior>AIR CONDITIONING>FRONT COOLING UNIT>INSTALLATION).
55312
3.INSTALL LOWER INSTRUMENT PANEL
Install the lower instrument panel (See page Vehicle Interior>INTERIOR PANEL>LOWER INSTRUMENT PANEL>INSTALLATION).
55301
4.INSTALL UPPER INSTRUMENT PANEL
Install the upper instrument panel (See page Vehicle Interior>INTERIOR PANEL>UPPER INSTRUMENT PANEL>INSTALLATION).
5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6.PERFORM INITIALIZATION
Perform initialization (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
7.CHECK SRS WARNING LIGHT
Check the SRS warning light (See page Vehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DIAGNOSIS SYSTEM).