2011-2016 FJ Cruiser · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Jul 2007 – Jul 2009

Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 from Nov 2010


1. INSTALL CRANKSHAFT POSITION SENSOR

  1. A076417E01
    Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.

  1. Install the crankshaft position sensor with the bolt.

    Torque:
    10 N*m{ 102 kgf*cm , 7.4 ft.*lbf }

  1. Connect the crankshaft position sensor connector.


2. INSTALL COOLER COMPRESSOR ASSEMBLY

  1. G036155E01
    Install the cooler compressor assembly with the 4 bolts.

    Torque:
    24.5 N*m{ 250 kgf*cm , 18 ft.*lbf }

  1. Connect the cooler compressor assembly connector.

  1. G036154E01
    Install the suction hose sub-assembly with the bolt.

    Torque:
    7.8 N*m{ 80 kgf*cm , 69 in.*lbf }


3. INSTALL GENERATOR ASSEMBLY
Refer to the procedures up to "INSTALL GENERATOR ASSEMBLY" (Click here)

4. INSTALL FAN
Refer to the procedures up to "INSTALL FAN" (Click here).

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }

← INSPECTION (from Aug 2009)INSTALLATION (Aug 2009 – Oct 2010) →