SYSTEM DESCRIPTION
Troubleshooting · Vehicles built Jul 2007 – Jul 2009
Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 Nov 2010 – Jul 2011 Aug 2011 – Jul 2012 Aug 2012 – Oct 2012 Nov 2012 – Jul 2014 from Aug 2014
| METER GAUGE AND WARNING INDICATOR |
| Item |
Signal Description |
| Speedometer |
for Automatic Transmission: Based on signals received from wheel speed sensor, skid control ECU calculates vehicle speed and transmits data to meter. for Manual Transmission: Indicates vehicle speed based on signals received from speed sensor. |
| Tachometer |
Indicates engine speed based on signals from ECM. |
| Fuel Gauge |
Indicates fuel level in accordance with signals received from fuel sender gauge. |
| Engine Coolant Temperature Gauge |
Indicates engine coolant temperature in accordance with signal from ECM. |
| Volt Gauge |
Indicates vehicle voltage according to voltage from IG terminal. |
| ODO/TRIP meter |
Calculates accumulated total vehicle travel distance and vehicle travel distance since trip meter knob pressed. |
| Item |
Signal Description |
| TURN SIGNAL |
Receives turn signal from turn signal flasher. |
| BEAM |
Receives beam signal from headlight dimmer switch. |
| CHARGE |
Receives malfunction signal from generator. |
| MIL |
Receives malfunction check signal from ECM. |
| DOOR |
Open door indicator illuminates when receiving signal from main body ECU (BEAN). |
| D BELT |
Receives driver seat belt signal (unfastened) from driver seat belt buckle switch. |
| BRAKE |
|
| OIL PRESSURE |
Receives malfunction signal from oil pressure switch. |
| AIRBAG |
Receives malfunction signal from center airbag sensor assembly. |
| ABS |
Receives malfunction signal from skid control ECU. |
| FUEL |
Receives fuel empty signals from fuel sender gauge. |
| CRUISE*1 |
Receives malfunction signal from ECM. |
| VSC TRC*2 |
Receives malfunction signal from skid control ECU. |
| TRC OFF*3 |
Receives TRAC control off signal from skid control ECU. |
| VSC OFF |
w/o VSC OFF Switch: Receives malfunction signal from skid control ECU. w/ VSC OFF Switch: Receives VSC control off signal from skid control ECU. |
| SLIP |
Receives malfunction signal from skid control ECU. |
| 4WD*4 |
Receives signals from 4WD control ECU while 4WD is operating. |
| CENTER DIFFERENTIAL LOCK*5 |
Receives signals from transfer indicator switch while center differential lock is operating. |
| A-TRAC*6 |
Receives A-TRAC signal from skid control ECU. |
| REAR DIFFERENTIAL LOCK*7 |
Receives signals from differential lock switch while rear differential lock is operating. |
| 120 km/h*8 |
Receives vehicle speed signal from skid control ECU. |
| A/T P*4 |
Receives signal from transfer indicator switch. |
| A/T OIL TEMP*4 |
Warning is displayed when oil temperature is high. |
| RR FOG*9 |
Receives rear fog light signal from rear fog light switch. |
| RSCA OFF*10 |
Receives RSCA OFF signal from center airbag sensor assembly. |
- *1: w/ Cruise Control
- *2: w/o VSC OFF Switch
- *3: w/ VSC OFF Switch
- *4: for Automatic Transmission
- *5: for Manual Transmission
- *6: w/ Active Traction Control
- *7: w/ Rear Differential Lock
- *8: w/ Speed Warning Function
- *9: w/ Rear Fog Light
- *10: w/ Curtain Airbag Cutoff Switch
| Item |
Signal Description |
| Key Reminder |
Buzzer ON when ignition switch off, key inserted and driver door open |
| Manual Shift Reverse*1 |
Buzzer ON when ignition switch ON and shift position reverse |
| Seat Belt Warning |
Buzzer ON when vehicle speed exceeds 20 km/h (12.4 mph) and seat belt unfastened |
| Speed Warning*2 |
Buzzer ON when vehicle speed 120 km/h (74.6 mph) or more |
- *1: for Manual Transmission
- *2: w/ Speed Warning Function