2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built Nov 2012 – Jul 2014

Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 Nov 2010 – Jul 2011 Aug 2011 – Jul 2012 Aug 2012 – Oct 2012 Nov 2012 – Jul 2014 from Aug 2014


METER GAUGE AND WARNING INDICATOR
Meter/Gauge 
Item
Signal Description
Speedometer
Indicates vehicle speed based on signals received from skid control ECU (CAN).
Tachometer
Indicates engine speed based on signals from ECM (CAN).
Fuel Gauge
  1. Indicates fuel level in accordance with signals received from fuel sender gauge assembly (Direct Line).*1
  1. Indicates fuel level in accordance with signals received from fuel sender gauge assembly and fuel sub-tank fuel sender gauge assembly (Direct Line).*2
Engine Coolant Temperature Gauge
Indicates engine coolant temperature in accordance with signal from ECM (CAN).
Volt Gauge
Indicates vehicle voltage according to voltage from IG terminal (Direct Line).
ODO/TRIP meter
Calculates accumulated total vehicle travel distance and vehicle travel distance since trip meter knob pressed.
  1. *1: for Single Tank Type
  2. *2: for Double Tank Type
Warning/Indicator 
Item
Signal Description
TURN SIGNAL
Receives turn signal from turn signal flasher (Direct Line).
BEAM
Receives beam signal from headlight dimmer switch (Direct Line).
CHARGE
Receives malfunction signal from generator (Direct Line).
MIL
Receives malfunction check signal from ECM (Direct Line).
DOOR
Open door indicator illuminates when receiving signal from main body ECU (BEAN).
D BELT
Receives driver seat belt signal (unfastened) from driver seat belt buckle switch (Direct Line).
BRAKE
  1. Receives parking brake switch signal from skid control ECU (CAN).
  2. Receives fluid level warning signal from skid control ECU (CAN).
OIL PRESSURE
Receives malfunction signal from oil pressure switch (Direct Line).
AIRBAG
Receives malfunction signal from center airbag sensor assembly (CAN).
ABS
Receives malfunction signal from skid control ECU (CAN).
FUEL
Receives fuel empty signals from fuel sender gauge (Direct Line).
CRUISE*1
Receives malfunction signal from ECM (CAN).
TRC OFF
Receives TRAC control off signal from skid control ECU (CAN).
VSC OFF
Receives VSC control off signal from skid control ECU (CAN).
SLIP
Receives malfunction signal from skid control ECU (CAN).
CRAWL*2
Receives CRAWL signals from driving support switch control ECU (CAN).
4WD*3
Receives signals from 4WD control ECU while 4WD is operating (Direct Line).
CENTER DIFFERENTIAL LOCK*4
Receives signals from transfer indicator switch while center differential lock is operating (Direct Line).
A-TRAC*5
Receives A-TRAC signal from skid control ECU (CAN).
REAR DIFFERENTIAL LOCK*6
Receives signals from differential lock switch while rear differential lock is operating (Direct Line).
120 km/h*7
Receives vehicle speed signal from skid control ECU (CAN).
A/T P*3
Receives signal from transfer indicator switch (Direct Line).
A/T OIL TEMP*3
Warning is displayed when oil temperature is high (CAN).
RR FOG*8
Receives rear fog light signal from rear fog light switch (Direct Line).
  1. *1: w/ Cruise Control System
  2. *2: w/ CRAWL
  3. *3: for Automatic Transmission
  4. *4: for Manual Transmission
  5. *5: w/ Active Traction Control
  6. *6: w/ Rear Differential Lock
  7. *7: w/ Speed Warning Function
  8. *8: w/ Rear Fog Light
Buzzer 
Item
Signal Description
Key Reminder
Buzzer ON: When ignition switch off, key inserted and driver door open
Manual Shift Reverse*1
Buzzer ON: When ignition switch ON and shift position reverse
Seat Belt Warning
Buzzer ON: When vehicle speed exceeds 20 km/h (12.4 mph) and seat belt unfastened
Speed Warning*2
Buzzer ON: When vehicle speed 120 km/h (74.6 mph) or more
Brake System Buzzer
Buzzer ON: Receives signal from skid control ECU (CAN).
  1. *1: for Manual Transmission
  2. *2: w/ Speed Warning Function

LED CHECK
  1. Check the indicator/warning light operation according to the condition(s) in the table below.

    Indicator/Warning Light
    Specification
    BRAKE, ABS, SLIP, VSC OFF, CRAWL*1, A-TRAC*2, 120 km/h*3
    Indicator/Warning light comes on for about 3 seconds after turning the ignition switch to ON.
    AIRBAG
    Warning light comes on for about 6 seconds after turning the ignition switch to ON.
    CHARGE, OIL PRESSURE, MIL, A/T OIL TEMP*4
    Indicator/Warning light comes on after turning the ignition switch to ON and the indicator light goes off after the engine starts.
    1. *1: w/ CRAWL
    2. *2: w/ Active Traction Control
    3. *3: w/ Speed Warning Function
    4. *4: for Automatic Transmission

← SYSTEM DESCRIPTION (Aug 2012 – Oct 2012)SYSTEM DESCRIPTION (from Aug 2014) →