SYSTEM DESCRIPTION
Troubleshooting · Vehicles built Aug 2012 – Oct 2012
Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 Nov 2010 – Jul 2011 Aug 2011 – Jul 2012 Aug 2012 – Oct 2012 Nov 2012 – Jul 2014 from Aug 2014
| METER GAUGE AND WARNING INDICATOR |
| Item |
Signal Description |
| Speedometer |
Indicates vehicle speed based on signals received from skid control ECU (CAN). |
| Tachometer |
Indicates engine speed based on signals from ECM (CAN). |
| Fuel Gauge |
Indicates fuel level in accordance with signals received from fuel sender gauge (Direct Line). |
| Engine Coolant Temperature Gauge |
Indicates engine coolant temperature in accordance with signal from ECM (CAN). |
| Volt Gauge |
Indicates vehicle voltage according to voltage from IG terminal (Direct Line). |
| ODO/TRIP meter |
Calculates accumulated total vehicle travel distance and vehicle travel distance since trip meter knob pressed. |
| Item |
Signal Description |
| TURN SIGNAL |
Receives turn signal from turn signal flasher (Direct Line). |
| BEAM |
Receives beam signal from headlight dimmer switch (Direct Line). |
| CHARGE |
Receives malfunction signal from generator (Direct Line). |
| MIL |
Receives malfunction check signal from ECM (Direct Line). |
| DOOR |
Open door indicator illuminates when receiving signal from main body ECU (BEAN). |
| D BELT |
Receives driver seat belt signal (unfastened) from driver seat belt buckle switch (Direct Line). |
| BRAKE |
|
| OIL PRESSURE |
Receives malfunction signal from oil pressure switch (Direct Line). |
| AIRBAG |
Receives malfunction signal from center airbag sensor assembly (CAN). |
| ABS |
Receives malfunction signal from skid control ECU (CAN). |
| FUEL |
Receives fuel empty signals from fuel sender gauge (Direct Line). |
| CRUISE*1 |
Receives malfunction signal from ECM (CAN). |
| TRC OFF |
Receives TRAC control off signal from skid control ECU (CAN). |
| VSC OFF |
Receives VSC control off signal from skid control ECU (CAN). |
| SLIP |
Receives malfunction signal from skid control ECU (CAN). |
| CRAWL*2 |
Receives CRAWL signals from driving support switch control ECU (CAN). |
| 4WD*3 |
Receives signals from 4WD control ECU while 4WD is operating (Direct Line). |
| CENTER DIFFERENTIAL LOCK*4 |
Receives signals from transfer indicator switch while center differential lock is operating (Direct Line). |
| A-TRAC*5 |
Receives A-TRAC signal from skid control ECU (CAN). |
| REAR DIFFERENTIAL LOCK*6 |
Receives signals from differential lock switch while rear differential lock is operating (Direct Line). |
| 120 km/h*7 |
Receives vehicle speed signal from skid control ECU (CAN). |
| A/T P*3 |
Receives signal from transfer indicator switch (Direct Line). |
| A/T OIL TEMP*3 |
Warning is displayed when oil temperature is high (CAN). |
| RR FOG*8 |
Receives rear fog light signal from rear fog light switch (Direct Line). |
- *1: w/ Cruise Control System
- *2: w/ CRAWL
- *3: for Automatic Transmission
- *4: for Manual Transmission
- *5: w/ Active Traction Control
- *6: w/ Rear Differential Lock
- *7: w/ Speed Warning Function
- *8: w/ Rear Fog Light
| Item |
Signal Description |
| Key Reminder |
Buzzer ON: When ignition switch off, key inserted and driver door open |
| Manual Shift Reverse*1 |
Buzzer ON: When ignition switch ON and shift position reverse |
| Seat Belt Warning |
Buzzer ON: When vehicle speed exceeds 20 km/h (12.4 mph) and seat belt unfastened |
| Speed Warning*2 |
Buzzer ON: When vehicle speed 120 km/h (74.6 mph) or more |
| Brake System Buzzer |
Buzzer ON: Receives signal from skid control ECU (CAN). |
- *1: for Manual Transmission
- *2: w/ Speed Warning Function
| LED CHECK |
Check the indicator/warning light operation according to the condition(s) in the table below.
Indicator/Warning Light
Specification
BRAKE, ABS, SLIP, VSC OFF, CRAWL*1, A-TRAC*2, 120 km/h*3
Indicator/Warning light comes on for about 3 seconds after turning the ignition switch to ON.
AIRBAG
Warning light comes on for about 6 seconds after turning the ignition switch to ON.
CHARGE, OIL PRESSURE, MIL, A/T OIL TEMP*4
Indicator/Warning light comes on after turning the ignition switch to ON and the indicator light goes off after the engine starts.
- *1: w/ CRAWL
- *2: w/ Active Traction Control
- *3: w/ Speed Warning Function
- *4: for Automatic Transmission
- *1: w/ CRAWL