2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built Aug 2009 – Oct 2010

Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 Nov 2010 – Jul 2011 Aug 2011 – Jul 2012 Aug 2012 – Oct 2012 Nov 2012 – Jul 2014 from Aug 2014


METER GAUGE AND WARNING INDICATOR
Meter/Gauge 
Item
Signal Description
Speedometer
for Automatic Transmission:
Based on signals received from wheel speed sensor, skid control ECU calculates vehicle speed and transmits data to meter.
for Manual Transmission:
Indicates vehicle speed based on signals received from speed sensor.
Tachometer
Indicates engine speed based on signals from ECM.
Fuel Gauge
Indicates fuel level in accordance with signals received from fuel sender gauge.
Engine Coolant Temperature Gauge
Indicates engine coolant temperature in accordance with signal from ECM.
Volt Gauge
Indicates vehicle voltage according to voltage from IG terminal.
ODO/TRIP meter
Calculates accumulated total vehicle travel distance and vehicle travel distance since trip meter knob pressed.
Warning/Indicator 
Item
Signal Description
TURN SIGNAL
Receives turn signal from turn signal flasher.
BEAM
Receives beam signal from headlight dimmer switch.
CHARGE
Receives malfunction signal from generator.
MIL
Receives malfunction check signal from ECM.
DOOR
Open door indicator illuminates when receiving signal from main body ECU (BEAN).
D BELT
Receives driver seat belt signal (unfastened) from driver seat belt buckle switch.
BRAKE
  1. Receives parking brake switch signal from skid control ECU.
  2. Receives fluid level warning signal from skid control ECU.
OIL PRESSURE
Receives malfunction signal from oil pressure switch.
AIRBAG
Receives malfunction signal from center airbag sensor assembly.
ABS
Receives malfunction signal from skid control ECU.
FUEL
Receives fuel empty signals from fuel sender gauge.
CRUISE*1
Receives malfunction signal from ECM.
TRC OFF
Receives TRAC control off signal from skid control ECU.
VSC OFF
Receives VSC control off signal from skid control ECU.
SLIP
Receives malfunction signal from skid control ECU.
4WD*2
Receives signals from 4WD control ECU while 4WD is operating.
CENTER DIFFERENTIAL LOCK*3
Receives signals from transfer indicator switch while center differential lock is operating.
A-TRAC*4
Receives A-TRAC signal from skid control ECU.
REAR DIFFERENTIAL LOCK*5
Receives signals from differential lock switch while rear differential lock is operating.
120 km/h*6
Receives vehicle speed signal from skid control ECU.
A/T P*2
Receives signal from transfer indicator switch.
A/T OIL TEMP*2
Warning is displayed when oil temperature is high.
RR FOG*7
Receives rear fog light signal from rear fog light switch.
RSCA OFF*8
Receives RSCA OFF signal from center airbag sensor assembly.
  1. *1: w/ Cruise Control
  2. *2: for Automatic Transmission
  3. *3: for Manual Transmission
  4. *4: w/ Active Traction Control
  5. *5: w/ Rear Differential Lock
  6. *6: w/ Speed Warning Function
  7. *7: w/ Rear Fog Light
  8. *8: w/ Curtain Airbag Cutoff Switch
Buzzer 
Item
Signal Description
Key Reminder
Buzzer ON when ignition switch off, key inserted and driver door open
Manual Shift Reverse*1
Buzzer ON when ignition switch ON and shift position reverse
Seat Belt Warning
Buzzer ON when vehicle speed exceeds 20 km/h (12.4 mph) and seat belt unfastened
Speed Warning*2
Buzzer ON when vehicle speed 120 km/h (74.6 mph) or more
  1. *1: for Manual Transmission
  2. *2: w/ Speed Warning Function
← SYSTEM DESCRIPTION (Jul 2007 – Jul 2009)SYSTEM DESCRIPTION (Nov 2010 – Jul 2011) →