Meter/Gauge
Item
|
Signal Description
|
Speedometer
|
Indicates vehicle speed based on signals received from skid control ECU (CAN).
|
Tachometer
|
Indicates engine speed based on signals from ECM (CAN).
|
Fuel Gauge
|
- Indicates fuel level in accordance with signals received from fuel sender gauge assembly (Direct Line).*1
- Indicates fuel level in accordance with signals received from fuel sender gauge assembly and fuel sub-tank fuel sender gauge assembly (Direct Line).*2
|
Engine Coolant Temperature Gauge
|
Indicates engine coolant temperature in accordance with signal from ECM (CAN).
|
Volt Gauge
|
Indicates vehicle voltage according to voltage from IG terminal (Direct Line).
|
ODO/TRIP meter
|
Calculates accumulated total vehicle travel distance and vehicle travel distance since trip meter knob pressed.
|
Warning/Indicator
Item
|
Signal Description
|
TURN SIGNAL
|
Receives turn signal from turn signal flasher (Direct Line).
|
BEAM
|
Receives beam signal from headlight dimmer switch (Direct Line).
|
CHARGE
|
Receives malfunction signal from generator (Direct Line).
|
MIL
|
Receives malfunction check signal from ECM (Direct Line).
|
DOOR
|
Open door indicator illuminates when receiving signal from main body ECU (BEAN).
|
D BELT
|
Receives driver seat belt signal (unfastened) from driver seat belt buckle switch (Direct Line).
|
BRAKE
|
- Receives parking brake switch signal from skid control ECU (CAN).
- Receives fluid level warning signal from skid control ECU (CAN).
|
OIL PRESSURE
|
Receives malfunction signal from oil pressure switch (Direct Line).
|
AIRBAG
|
Receives malfunction signal from center airbag sensor assembly (CAN).
|
ABS
|
Receives malfunction signal from skid control ECU (CAN).
|
FUEL
|
Receives fuel empty signals from fuel sender gauge (Direct Line).
|
CRUISE*1
|
Receives malfunction signal from ECM (CAN).
|
TRC OFF
|
Receives TRAC control off signal from skid control ECU (CAN).
|
VSC OFF
|
Receives VSC control off signal from skid control ECU (CAN).
|
SLIP
|
Receives malfunction signal from skid control ECU (CAN).
|
CRAWL*2
|
Receives CRAWL signals from driving support switch control ECU (CAN).
|
4WD*3
|
Receives signals from 4WD control ECU while 4WD is operating (Direct Line).
|
CENTER DIFFERENTIAL LOCK*4
|
Receives signals from transfer indicator switch while center differential lock is operating (Direct Line).
|
A-TRAC*5
|
Receives A-TRAC signal from skid control ECU (CAN).
|
REAR DIFFERENTIAL LOCK*6
|
Receives signals from differential lock switch while rear differential lock is operating (Direct Line).
|
120 km/h*7
|
Receives vehicle speed signal from skid control ECU (CAN).
|
A/T P*3
|
Receives signal from transfer indicator switch (Direct Line).
|
A/T OIL TEMP*3
|
Warning is displayed when oil temperature is high (CAN).
|
Rear FOG*8
|
Receives rear fog light signal from rear fog light switch (Direct Line).
|
Front FOG*9
|
Receives front fog light signal from front fog light relay (Direct Line).
|