Raise the front of the V-bank cover to disengage the 2 pins.
Remove the 2 V-bank cover hooks from the bracket.
Remove the V-bank cover.
Text in Illustration
*1
Pin
*2
Hook
2.
REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
Remove the 4 bolts.
Unhook the engine under cover from the vehicle body as shown in the illustration.
3.
DRAIN ENGINE COOLANT
CAUTION:
Do not remove the radiator cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.
Remove the service hole cover from the engine under cover.
Install a vinyl hose onto the drain on the radiator side.
Text in Illustration
*1
Vinyl Hose
*2
Tape
Fix the vinyl hose with tape.
Text in Illustration
*1
Radiator Cap
*2
Reservoir Cap
*3
Radiator Drain Cock Plug
*4
Cylinder Block Drain Cock Plug
Loosen the radiator drain cock plug.
Remove the radiator cap and drain the coolant.
HINT:
Collect the coolant in a container and dispose of it according to the regulations in your area.
Loosen the 2 cylinder block drain cock plugs and drain the coolant from the engine.
NOTICE:
If coolant is not drained from the radiator drain cock plug, cylinder block drain cock plugs and radiator reservoir, clogging in the radiator or coolant leakage from the seal of water pump may result.
4.
REMOVE UPPER RADIATOR SUPPORT SEAL
Disengage the 7 clips, then remove the radiator support seal.