2011-2016 FJ Cruiser · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Jul 2007 – Jul 2009

Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 Nov 2010 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014


1. REMOVE V-BANK COVER

A126474
  1. Remove the 2 nuts, then remove the V-bank cover.


2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
  1. Remove the 4 bolts, then remove the No. 1 engine under cover.


3. DRAIN ENGINE COOLANT

A070279E01

CAUTION:
To avoid the danger of being burned, do not remove the radiator cap while the engine and radiator are still hot. Thermal expansion will cause hot engine coolant and steam to blow out from the radiator.

  1. Remove the service hole cover from the engine under cover.

  1. Install a vinyl hose onto the drain on the radiator side.

  1. Fix the vinyl hose with tape.

  1. A076320E02
    Loosen the 3 drain plugs on the engine and radiator, and drain the coolant.

  1. Remove the radiator cap.

  1. Drain the coolant from the reservoir tank.

  1. Tighten the 3 drain plugs.

    Torque:
    13 N*m{ 130 kgf*cm , 9 ft.*lbf } for the engine

  1. Remove the vinyl hose from the radiator.


4. REMOVE RADIATOR SUPPORT SEAL UPPER

  1. A129880
    Disengage the 7 clips, then remove the radiator support seal.


5. REMOVE FAN SHROUD

  1. A129881
    Disconnect the hose from the radiator.

  1. A129882
    Loosen the 4 nuts from the fan pulley.

  1. Remove the fan and generator V belt.
    (Click here)

  1. Remove the 4 nuts and the fluid coupling assembly with fan.

  1. Remove the bolt from the reserve tank.

  1. A129884E01
    Remove the 2 bolts from the fan shroud.

  1. Remove the fluid coupling assembly with fan and fan shroud.

  1. Remove the fan pulley.


6. REMOVE RADIATOR GRILLE

  1. B134729
    Using a clip remover, remove the 2 clips.

  1. Remove the 2 screws.

  1. Disengage the 5 clips and remove the radiator grille.


7. REMOVE RADIATOR ASSEMBLY

  1. A129883
    Disconnect the 2 radiator hoses.

  1. A129943
    Disconnect the 2 oil cooler hoses (w/ automatic transmission).

  1. Remove the 4 bolts, then remove the radiator.

    A129886


8. REMOVE NO. 1 RADIATOR HOSE

A129887

9. REMOVE NO. 2 RADIATOR HOSE

A129888

10. REMOVE OIL COOLER HOSE

A129889
← ON-VEHICLE CLEANING (Jul 2007 – Jul 2009)REMOVAL (Aug 2009 – Oct 2010) →