Home › BODY ELECTRICAL › WIPER AND WASHER › WIPER AND WASHER SYSTEM

WIPER AND WASHER SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


Use the table below to help find the cause of the problem. The numbers indicate the priority of the likely cause of the problem. Check each part in order. If necessary, replace these parts.

1. FRONT WIPER AND WASHER SYSTEM 
Symptom
Suspected area
See page
Both front wipers and washer systems do not operate.
1. IG1 Relay
-
2. Wiper switch
Click here
3. Wire harness or connector
-
Front wipers do not operate when the windshield washer is normal.
1. WIP Fuse
-
2. Wiper switch
Click here
3. Front wiper motor
Click here
4. Wire harness or connector
-
Front wipers do not operate in LO or HI.
1. WIP Fuse
-
2. Wiper switch
Click here
3. Front wiper motor
Click here
4. Wire harness or connector
-
Front wipers do not operate in INT.
1. Wiper switch
Click here
2. Front wiper motor
Click here
3. Wire harness or connector
-
Windshield washer motor does not operate.
1. WSH Fuse
-
2. Wiper switch
Click here
3. Front washer motor
Click here
4. Wire harness or connector
-
Front wipers do not operate when a jet washer fluid is emitted with the washer switch on.
1. Wiper switch
Click here
2. Front wiper motor
Click here
3. Wire harness or connector
-
A jet of washer fluid is not emitted when windshield washer motor is normal.
1. Washer hose and nozzle
-
Wiper blade does not return or the return position is wrong when the windshield wiper switch is off.
1. Front wiper motor
Click here
2. Wire harness or connector
-

2. REAR WIPER AND WASHER SYSTEM 
Symptom
Suspected area
See page
Both rear wiper and washer systems do not operate.
1. IG1 Relay
-
2. RR WIP-WSH Fuse
-
3. Wiper switch
Click here
4. Wire harness or connector
-
Rear wiper does not operate in INT or ON.
1. Wiper switch
Click here
2. Rear wiper motor
Click here
3. Wire harness or connector
-
Rear washer motor does not operate.
1. Wiper switch
Click here
2. Rear washer motor
Click here
3. Wire harness or connector
-
A jet of washer fluid is not emitted when rear washer motor is normal.
1. Washer hose and nozzle
-
Wiper blade does not return or the return position is wrong when the rear wiper switch is off.
1. Rear wiper motor
Click here
2. Wire harness or connector
-