DIAGNOSIS SYSTEM
Troubleshooting · Vehicles built Oct 2014 – Dec 2014
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| BUS CHECK (COMMUNICATION MALFUNCTION ECU) |
Select "Bus Check" from the "System Select" screen on the intelligent tester.

Select "Communication Malfunction DTC" from the "Bus Check" screen, and then select "Enter".

Select the system of the DTC to be checked and select "Details".

CAN communication system DTCs are output.

| BUS CHECK (COMMUNICATION BUS CHECK) |
- HINT:
- The ECUs and sensors that are properly connected to the CAN communication system can be displayed using the intelligent tester.
Select "Communication Bus Check" from the "Bus Check" screen.

The screen displays the ECUs and sensors that are properly connected to the CAN communication system.
- HINT:
- If any properly connected ECUs or sensors are not displayed, there is a communication stop in the system (Click here).
-
The default item displayed in the combo box is "ALL". When checking the ECUs (sensors) connected to each bus, pull down the combo box and select the bus to be checked from the drop-down list. The drop-down list displays "ALL", "V Bus" and the names of the remaining buses.

Combo Box
Display Content
ALL
All ECUs (sensors) connected to the CAN bus
V Bus
ECUs (sensors) connected to the V Bus
Bus Name
ECUs (sensors) connected to the selected bus
- The connection status (shown below) is indicated by the background color displayed behind the system name.
ECU (Sensor) on V Bus Background Color
Connection Status
White
Detected normally
Yellow
Could not be detected in the past, but is currently detected
Red
Detected in the past, but cannot be detected now
Yellow
Could not be detected in the past, but is currently detected
Not displayed
Has never been detected
ECU (Sensor) with no Data Monitor History Background Color
Connection Status
White
Detected normally
Yellow
Could not be detected in the past, but is currently detected
Red
Detected in the past, but cannot be detected now
Not displayed
Has never been detected
ECU (Sensor) with Data Monitor History Background Color
Connection Status
White
Detected normally
Yellow
Could not be detected in the past, but is currently detected
Red
Detected in the past, but cannot be detected now
Red
Has never been detected but has connection history
Not displayed
Has never been detected and has no connection history
- If any properly connected ECUs or sensors are not displayed, there is a communication stop in the system (Click here).
"There is no system connected the communication bus." is displayed if there are no ECUs or sensors connected to the CAN bus.

| CHECK INSTALLED SYSTEMS (ECUS AND SENSORS) THAT USE CAN COMMUNICATION |
Systems (ECUs and sensors) that use CAN communication vary depending on the optional settings of the vehicle. Check which systems (ECUs and sensors) are installed on the vehicle.
ECU/Sensor Name
Tester Display
Installed on
ECM
ECM (Engine)
All vehicles
Combination meter assembly
Combination Meter
All vehicles
Air conditioning amplifier assembly
Air Conditioning Amplifier
For vehicles with an air conditioning system, except 5L-E
Certification ECU (smart key ECU assembly)
Certification (Smart)
For vehicles with a smart entry and start system
Headlight leveling ECU assembly
Headlight swivel (AFS)
For vehicles with an LED headlight
| DTC TABLE BY ECU |
- HINT:
- In the CAN communication system, CAN communication system DTCs stored by an ECU can be output by using the intelligent tester.
- If CAN communication system DTCs are output, the trouble cannot be determined solely from the DTCs. Perform troubleshooting according to "How to Proceed with Troubleshooting" (Click here).
- In the CAN communication system, CAN communication system DTCs stored by an ECU can be output by using the intelligent tester.
ECM
- HINT:
- DTC communication uses the CAN communication system.
DTC Code
Detection Item
U0101*
Lost Communication with TCM
- *: Refer to ECD System
- for 1KD-FTV (w/ DPF): Click here
- for 1KD-FTV (w/o DPF): Click here
- for 2KD-FTV : Click here
TRANSMISSION CONTROL ECU ASSEMBLY (for 1KD-FTV, 2KD-FTV and Automatic Transmission)
- HINT:
- DTC communication uses the CAN communication system.
DTC Code
Detection Item
U0100*
Lost Communication with ECM/PCM "A"
- *: Refer to Electronic Controlled Automatic Transmission System (Click here).
AIR CONDITIONING AMPLIFIER ASSEMBLY (w/ Air Conditioning System, except 5L-E)
- HINT:
- DTC communication uses the CAN communication system.
DTC Code
Detection Item
B1499
Communication Malfunction (Engine&Meter ECU)
COMBINATION METER ASSEMBLY
- HINT:
- DTC communication uses the CAN communication system.
DTC Code
Detection Item
U0100
Lost Communication with ECM/PCM "A"
U0182
Lost Communication with Lighting Control Module Front
CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) (w/ Smart Entry and Start System)
- HINT:
- DTC communication uses the CAN communication system.
DTC Code
Detection Item
U0100
Lost Communication With ECM/PCM "A"
U0155
Lost Communication with Instrument Panel Cluster (IPC) Control Module
HEADLIGHT LEVELING ECU ASSEMBLY (for LED Headlight)
DTC Code
Detection Item
U0100
Lost Communication with ECM/PCM "A"
U0155
Lost Communication with Instrument Panel Cluster (IPC) Control Module
U1000*
CAN Communication Failure(Message Registry)
- *: Refer to Lighting System (Click here).
- *: Refer to Lighting System (Click here).
| DTC COMBINATION TABLE |
- ○: Stored.
- X: When one side of branch wire is open, storage may occur.
- -: Not stored.
Output from
Output DTC
Detection Item
Detected Communication Stop Mode
V1 Bus
ECM Communication Stop Mode
Air Conditioning Amplifier Communication Stop Mode
Combination Meter ECU Communication Stop Mode
Certification ECU Communication Stop Mode
AFS ECU Communication Stop Mode
Air conditioning amplifier assembly
B1499
Communication Malfunction (Engine&Meter ECU)
○
○
○
X
X
Combination meter assembly
U0100
Lost Communication with ECM/PCM "A"
○
X
○
X
X
U0182
Lost Communication with Lighting Control Module Front
X
X
○
X
○
Certification ECU (smart key ECU assembly)
U0100
Lost Communication With ECM/PCM "A"
○
X
X
○
X
U0155
Lost Communication with Instrument Panel Cluster (IPC) Control Module
X
X
○
○
X
Headlight leveling ECU assembly
U0100
Lost Communication with ECM/PCM "A"
○
X
X
X
○
U0155
Lost Communication with Instrument Panel Cluster (IPC) Control Module
X
X
○
X
○