Home › Engine / Hybrid System › 1GD-FTV (COOLING) › RADIATOR › 2019.06–2020.05
RM35X0E _51 Engine / Hybrid System _079309 1GD-FTV COOLING _0386771 RADIATOR A

1GD-FTV COOLING  RADIATOR  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 51406A 1.REMOVE NO. 2 ENGINE UNDER COVER SUB-ASSEMBLY (w/ No. 2 Engine Under Cover Sub-assembly)

Hide 52618 2.REMOVE LOWER FRONT BUMPER ABSORBER

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 4.DRAIN ENGINE COOLANT

Hide 17751 6.REMOVE NO. 1 AIR CLEANER INLET

a.
A442850

Remove the 2 bolts and No. 1 air cleaner inlet.


Hide 44360 7.DISCONNECT VANE PUMP OIL RESERVOIR ASSEMBLY

a.
A442854

Remove the 2 bolts.


b.
A442855

Detach the clamps and disconnect the vane pump oil reservoir assembly.


Hide 16470 9.REMOVE RADIATOR RESERVE TANK ASSEMBLY

a.
A442851C01
2.073,1.854 2.802,1.479 true 2.792,1.344 3.01,1.51 0.219,0.167 10 true *1
*1 No. 2 Water By-pass Hose


Slide the clip and disconnect the No. 2 water by-pass hose from the radiator reserve tank assembly.


b.
A442852C01
2.385,1.635 2.875,1.531 true 2.865,1.417 3.073,1.573 0.208,0.156 10 true *1
*1 No. 1 Water By-pass Hose
V100135

Clip
V100136

Bolt


Slide the clip and disconnect the No. 1 water by-pass hose from the radiator assembly.


c.

Remove the 2 bolts and radiator reserve tank assembly.


Hide 16571C 10.REMOVE NO. 1 RADIATOR HOSE

a.
A442853

Slide the clips and remove the No. 1 radiator hose from the radiator assembly and water outlet sub-assembly.


Hide 88359 11.REMOVE VISCOUS HEATER V BELT (w/ Viscous Heater)

Hide 16711 12.REMOVE FAN SHROUD

a.
A442856C01
1.938,1 2.635,1.135 true 2.635,1.073 2.854,1.24 0.219,0.167 10 true *1
*1 No. 2 Water By-pass Hose


Slide the clip and disconnect the No. 2 water by-pass hose from the radiator assembly.


b.
A442857

Loosen the 4 nuts holding the fan with fluid coupling assembly.


c.

Remove the fan and generator V belt.

Click hereGeneral>MAINTENANCE>1GD-FTV DRIVE BELT>REMOVAL


d.
A442859

Detach the claws.


e.

for Automatic Transmission:

i.
A442858

Detach the clamp and disconnect the oil cooler inlet hose.



f.
A443596

Remove the 4 nuts of the fan with fluid coupling assembly.


g.
A442860

Detach the guides.


h.
A442861C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the fan shroud together with the fluid coupling assembly as shown in the illustration.

NOTICE:

Do not allow the radiator assembly to interfere with other parts.



i.

Remove the fan pulley from the water pump assembly.


Hide 16572D 13.REMOVE NO. 2 RADIATOR HOSE

a.
A442865

Slide the clips and remove the No. 2 radiator hose from the radiator assembly and water inlet.


Hide 17311B 16.REMOVE NO. 1 AIR INLET DUCT

a.
A442866

Remove the clips.


b.

Detach the claws, guides and remove the No. 1 air inlet duct.


Hide 53286F 17.REMOVE RADIATOR SIDE AIR SEAL LH (for Wagon)

a.
A449477

Detach the claw, clip and remove the radiator side air seal LH.


Hide 53285N 18.REMOVE RADIATOR SIDE AIR SEAL RH (for Wagon)

a.
A449478

Detach the claws and remove the radiator side air seal RH.


Hide 51466 19.REMOVE UPPER RADIATOR SUPPORT BRACE LH (for Wagon)

Hide 51465 20.REMOVE UPPER RADIATOR SUPPORT BRACE RH (for Wagon)

Hide 86520 21.REMOVE LOW PITCHED HORN ASSEMBLY

Hide 86510 22.REMOVE HIGH PITCHED HORN ASSEMBLY (for 2-piece Type)

Hide 88590E 23.REMOVE BLOWER ASSEMBLY WITH SHROUD (w/ Condenser Fan)

Hide 53209B 24.REMOVE HOOD LOCK SUPPORT BRACE SUB-ASSEMBLY

a.
A442867C01
2.177,0.979 2.792,0.677 true 2.771,0.563 2.979,0.729 0.208,0.167 10 true *1
*1 Engine Room Main Wire


Disconnect the connector.


b.

Detach the clamps and disconnect the engine room main wire.


c.

w/ Air Conditioning System:

i.
A442868C01
2.531,1.802 2.344,1.396 true 2.49,1.802 2.719,1.969 0.229,0.167 10 true *1
*1 Air Conditioner Tube and Accessory Assembly


Detach the clamp and disconnect the air conditioner tube and accessory assembly.



d.
A442869

Remove the 2 bolts and hood lock support brace sub-assembly.


Hide 16546 25.REMOVE RADIATOR PROTECTOR (w/o Air Conditioning System)

a.
A442870

Remove the 2 bolts.


b.

Detach the guides and remove the radiator protector.


Hide 53205 26.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

a.
A442871C01
0.917,1.417 1.135,0.865 true 0.76,1.417 0.969,1.594 0.208,0.177 10 true *1
*1 Engine Room Main Wire


Remove the bolt and disconnect the engine room main wire.


b.

for LHD:

i.
A442872C01
2.198,0.948 2.594,0.313 true 1.563,1.823 1.219,1.583 true 1.531,1.781 1.76,1.948 0.229,0.167 10 true *1 2.521,0.146 2.74,0.323 0.219,0.177 10 true *2
*1 Engine Room Main Wire
*2 Hood Lock Control Cable Assembly


Remove the 4 bolts.


ii.

Detach the clamps and disconnect the engine room main wire and hood lock control cable assembly and remove the upper radiator support sub-assembly.

NOTICE:

Do not allow the cooler condenser assembly to interfere with the radiator assembly. (w/ Air Conditioning System)




c.

for RHD:

i.
A442873C01
0.271,1.427 0.719,0.875 true 1.51,1.729 1.208,1.573 true 1.51,1.698 1.729,1.896 0.219,0.198 10 true *1 0.115,1.396 0.344,1.573 0.229,0.177 10 true *2
*1 Engine Room Main Wire
*2 Hood Lock Control Cable Assembly


Remove the 4 bolts.


ii.

Detach the clamps and disconnect the engine room main wire and hood lock control cable assembly and remove the upper radiator support sub-assembly.

NOTICE:

Do not allow the cooler condenser assembly to interfere with the radiator assembly. (w/ Air Conditioning System)




Hide 32921D 27.DISCONNECT OIL COOLER INLET HOSE (for Automatic Transmission)

a.
A442863

Slide the clip and disconnect the oil cooler inlet hose from the radiator assembly.


Hide 32922A 28.DISCONNECT OIL COOLER OUTLET HOSE (for Automatic Transmission)

a.
A442864

Slide the clip and disconnect the oil cooler outlet hose from the radiator assembly.


Hide 16400 29.REMOVE RADIATOR ASSEMBLY

a.

w/ Air Conditioning System:

i.
A442874C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the radiator assembly from the vehicle as shown in the illustration.

NOTICE:
·

Perform the following procedure with 2 or more people to prevent damage to the radiator assembly.

·

When removing the radiator assembly, do not damage the cooler condenser assembly.

·

Prepare a drain pan or cloth in case the coolant leaks.





b.

w/o Air Conditioning System:

i.
A442876C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the radiator assembly from the vehicle as shown in the illustration.

NOTICE:
·

Perform the following procedure with 2 or more people to prevent damage to the radiator assembly.

·

Prepare a drain pan or cloth in case the coolant leaks.





Hide 16523A 30.REMOVE RADIATOR SUPPORT CUSHION

a.
A442878

Remove the 2 radiator support cushions from the radiator assembly.


Hide 16535 31.REMOVE LOWER RADIATOR SUPPORT

a.
A442879

Remove the 2 lower radiator supports from the radiator assembly.