2. PERFORM ACTIVE TEST USING INTELLIGENT TESTER (VSC OFF INDICATOR LIGHT)
Connect the intelligent tester to the DLC3.
Start the engine.
Select the Active Test mode on the intelligent tester (Click here).
ABS / VSC / TRC:
Tester Display
Test Part
Control Range
Diagnostic Note
VSC OFF Indicator Light
VSC OFF indicator light
Indicator light ON/OFF
Observe combination meter
Check that the VSC OFF indicator light on the combination meter turns on or off in accordance with the intelligent tester operation.
OK:
The VSC OFF indicator light turns on or off in accordance with the intelligent tester operation.
HINT:
If troubleshooting has been carried out according to the Problem Symptoms Table, refer back to the table and proceed to the next step before replacing the part (Click here).