Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
  1. Use the table below to help determine the cause of the problem symptom. The likely causes of the problem are indicated in descending order. Check each suspected area in order. Repair or replace faulty parts or perform adjustments as necessary.
  2. Inspect the fuse and relay related to this system before inspecting the suspected areas below.


CRUISE CONTROL SYSTEM: 
Symptom
Suspected Area
See page
Vehicle speed cannot be set. (The CRUISE main indicator light comes on.)
Cruise control switch circuit
Click here
Combination meter
Click here
Vehicle speed sensor circuit
Click here
Stop light switch circuit
Click here
Transmission range sensor circuit (for U151E)
Click here
Transmission range sensor circuit (for U151F)
Click here
If the symptom still occurs after the above areas have been inspected and have proven to be normal, replace the ECM.
Click here
Pushing the ON-OFF button does not turn the cruise control system on. (Vehicle speed cannot be set.)
Stop light switch circuit
Click here
Vehicle speed sensor circuit
Click here
Cruise control switch circuit
Click here
Transmission range sensor circuit (for U151E)
Click here
Transmission range sensor circuit (for U151F)
Click here
Combination meter
Click here
If the symptom still occurs after the above areas have been inspected and have proven to be normal, replace the ECM.
Click here
Pushing the ON-OFF button does not turn the cruise control system on. (Vehicle speed can be set.)
Cruise main indicator light circuit
Click here
If the symptom still occurs after the above area has been inspected and has proven to be normal, replace the ECM.
Click here
The cruise control is canceled while it is operating.
Stop light switch circuit
Click here
Transmission range sensor circuit (for U151E)
Click here
Transmission range sensor circuit (for U151F)
Click here
Cruise control switch circuit
Click here
Vehicle speed sensor circuit
Click here
If the symptom still occurs after the above areas have been inspected and have proven to be normal, replace the ECM.
Click here
Pulling back on the cruise control main switch does not cancel the cruise control. (The CRUISE main indicator light remains on.)
Cruise control switch circuit
Click here
If the symptom still occurs after the above area has been inspected and has proven to be normal, replace the ECM.
Click here
Pulling back on the cruise control main switch does not cancel the cruise control. (The CRUISE main indicator light goes off.)
ECM
Click here
The cruise control is not canceled when vehicle speed drops below the low speed limit. (The CRUISE main indicator light remains on.)
Vehicle speed sensor circuit
Click here
If the symptom still occurs after the above area has been inspected and has proven to be normal, replace the ECM.
Click here
The cruise control is not canceled when vehicle speed drops below the low speed limit. (The CRUISE main indicator light goes off.)
ECM
Click here
Depressing the brake pedal does not cancel the cruise control. (The CRUISE main indicator light remains on.)
Stop light switch circuit
Click here
If the symptom still occurs after the above area has been inspected and has proven to be normal, replace the ECM.
Click here
Depressing the brake pedal does not cancel the cruise control. (The CRUISE main indicator light goes off.)
ECM
Click here
Moving the shift lever does not cancel the cruise control.
Transmission range sensor circuit (for U151E)
Click here
Transmission range sensor circuit (for U151F)
Click here
If the symptom still occurs after the above area has been inspected and has proven to be normal, replace the ECM.
Click here
Hunting (Speed is not constant.)
Vehicle speed sensor circuit
Click here
If the symptom still occurs after the above area has been inspected and has proven to be normal, replace the ECM.
Click here
The CRUISE main indicator light remains blinking.
TC and CG terminal circuit
Click here
If the symptom still occurs after the above area has been inspected and has proven to be normal, replace the ECM.
Click here