1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
53111
2.REMOVE RADIATOR GRILLE
17750A
3.REMOVE INLET AIR CLEANER ASSEMBLY
for 1AR-FE:
Click hereEngine / Hybrid System>1AR-FE (ENGINE MECHANICAL)>ENGINE ASSEMBLY>REMOVAL
for 2GR-FKS:
Click hereEngine / Hybrid System>2GR-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>REMOVAL
28800
4.REMOVE BATTERY
for 1AR-FE:
Click hereEngine / Hybrid System>1AR-FE (ENGINE MECHANICAL)>ENGINE ASSEMBLY>REMOVAL
for 2GR-FKS:
Click hereEngine / Hybrid System>2GR-FKS (ENGINE MECHANICAL)>ENGINE ASSEMBLY>REMOVAL
53510
5.REMOVE HOOD LOCK ASSEMBLY
for LHD:
Click hereVehicle Exterior>DOOR / HATCH>HOOD LOCK CONTROL CABLE ASSEMBLY>REMOVAL
for RHD:
Click hereVehicle Exterior>DOOR / HATCH>HOOD LOCK CONTROL CABLE ASSEMBLY>REMOVAL
53205
6.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY
Disconnect the 2 connectors.
Disengage the clamp.
Remove the 5 bolts and upper radiator support sub-assembly.
88703
7.DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY
Remove the bolt and disconnect the discharge hose sub-assembly from the cooler condenser assembly.
Remove the O-ring from the discharge hose sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
8.DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY
Remove the bolt and disconnect the air conditioner tube and accessory assembly from the cooler condenser assembly.
Remove the O-ring from the air conditioner tube and accessory assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88460
9.REMOVE COOLER CONDENSER ASSEMBLY
Disengage the 4 claws.
Disengage the 2 guides and remove the cooler condenser assembly as shown in the illustration.
Do not damage the condenser or radiator when removing the cooler condenser assembly.