67914
1.REMOVE FRONT DOOR SCUFF PLATE LH (for LHD)
62112A
2.REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD)
55606
3.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)
67913
4.REMOVE FRONT DOOR SCUFF PLATE RH (for RHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>REMOVAL
62111A
5.REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for RHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>REMOVAL
55606
6.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL
7.REMOVE FRONT WHEEL LH (for LHD)
75086
8.REMOVE FRONT FENDER WHEEL OPENING MOULDING SUB-ASSEMBLY LH (for LHD)
53852B
9.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH (for LHD)
Use the same procedure as for the RH side.
Click hereVehicle Exterior>WIPER / WASHER>WASHER MOTOR>REMOVAL
53876A
10.REMOVE FRONT FENDER LINER LH (for LHD)
Use the same procedure as for the RH side.
Click hereVehicle Exterior>WIPER / WASHER>WASHER MOTOR>REMOVAL
11.REMOVE FRONT WHEEL RH (for RHD)
75085A
12.REMOVE FRONT FENDER WHEEL OPENING MOULDING SUB-ASSEMBLY RH (for RHD)
Use the same procedure as for the LH side.
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>WHEEL OPENING MOULDING(for Front Side)>REMOVAL
53851D
13.REMOVE FRONT WHEEL OPENING EXTENSION PAD RH (for RHD)
53875A
14.REMOVE FRONT FENDER LINER RH (for RHD)
53601
15.DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
53601
16.REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Disconnect the hood lock control cable assembly and remove the hood lock control lever sub-assembly.
53111
17.REMOVE RADIATOR GRILLE
53510
18.REMOVE HOOD LOCK ASSEMBLY (for LHD)
| *a | Protective Tape |
Using a screwdriver, remove the hood lock nut cap.
Tape the screwdriver tip before use.
Disconnect the connector.
| *1 | Hood Lock Bolt |
Remove the 2 bolts and hood lock bolt.
Disconnect the hood lock control cable assembly and remove the hood lock assembly.
53510
19.REMOVE HOOD LOCK ASSEMBLY (for RHD)
| *a | Protective Tape |
Using a screwdriver, remove the hood lock nut cap.
Tape the screwdriver tip before use.
Disconnect the connector.
| *1 | Hood Lock Bolt |
Remove the 2 bolts and hood lock bolt.
Disconnect the hood lock control cable assembly and remove the hood lock assembly.
53630
20.REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)
Using a screwdriver, disengage the 5 clamps and hood cable grommet as shown in the illustration.
| *1 | Hood Lock Control Cable Assembly | - | - |
| *a | Clamp | *b | Hood Cable Grommet |
Tape the screwdriver tip before use.
Pull the hood lock control cable assembly from the engine compartment and remove it.
53630
21.REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)
Using a screwdriver, disengage 5 clamps and hood cable grommet as shown in the illustration.
| *1 | Hood Lock Control Cable Assembly | - | - |
| *a | Clamp | *b | Hood Cable Grommet |
Tape the screwdriver tip before use.
Pull the hood lock control cable assembly from the engine compartment and remove it.