Home › Engine / Hybrid System › 2GR-FKS (COOLING) › COOLING FAN MOTOR › from 2016.11
RM3160E _51 Engine / Hybrid System _060161 2GR-FKS COOLING _0297918 COOLING FAN MOTOR A

2GR-FKS COOLING  COOLING FAN MOTOR  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 53111 3.REMOVE RADIATOR GRILLE

Hide 17750A 4.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 53510 6.REMOVE HOOD LOCK ASSEMBLY (for LHD)

Hide 53510 7.REMOVE HOOD LOCK ASSEMBLY (for RHD)

Hide 53205 8.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

Hide 16571C 9.DISCONNECT NO. 1 RADIATOR HOSE

a.
A394892

Slide the clip and disconnect the No. 1 radiator hose.


Hide 10.DISCONNECT RADIATOR RESERVE TANK HOSE

a.
A315239

Disconnect the radiator reserve tank hose.


Hide 11.REMOVE FAN SHROUD ASSEMBLY

a.
A315240

Disconnect the cooling fan ECU connector.


b.

Disengage the 4 wire harness clamps.


c.
A315790

Disengage the 3 claws.


d.

Disengage the 3 guides to remove the fan shroud assembly from the radiator assembly.

NOTICE:

Do not damage the radiator assembly when removing the fan shroud assembly.



Hide 16361K 12.REMOVE FAN LH

a.
A315241

Remove the nut and fan LH.


Hide 16361J 13.REMOVE FAN RH

a.
A315242

Remove the nut and fan RH.


Hide 16363G 14.REMOVE COOLING FAN MOTOR LH

a.
A315244

Disconnect the cooling fan motor LH connector and disengage the wire harness from the 2 clamps.


b.
A315248

Remove the 3 screws and cooling fan motor LH.


Hide 16363F 15.REMOVE COOLING FAN MOTOR RH

a.
A315245

Disconnect the cooling fan motor RH connector and disengage the wire harness from the clamp.


b.
A315249

Remove the 3 screws and cooling fan motor RH.