Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › CAMSHAFT OIL CONTROL SOLENOID › from 2016.11
RM3160E _51 Engine / Hybrid System _060156 2GR-FKS ENGINE CONTROL _0303252 CAMSHAFT OIL CONTROL SOLENOID A

2GR-FKS ENGINE CONTROL  CAMSHAFT OIL CONTROL SOLENOID  INSTALLATION  


PROCEDURE

Hide 15370 1.INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 1)

a.
A394294C01
1.219,0.979 1.99,1.781 1.99,1.781 2.844,0.979 true 1.938,1.781 2.25,1.938 0.313,0.156 10 false *1
*1 O-ring


Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly as shown in the illustration.

NOTICE:

Do not damage the O-ring.



b.
A192239C95
1.49,1.938 1.781,1.938 1.781,1.938 1.865,1.583 false 1.323,1.844 1.635,2 0.313,0.156 10 false *a
*a Adhesive


Apply adhesive to 2 or 3 threads of 2 new bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



c.

Install the camshaft timing oil control solenoid assembly to the timing chain cover assembly with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control solenoid assembly.




d.

Connect the camshaft timing oil control solenoid assembly connector.


Hide 15370 2.INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 1)

a.
A394294C01
1.219,0.979 1.99,1.781 1.99,1.781 2.844,0.979 true 1.938,1.781 2.25,1.938 0.313,0.156 10 false *1
*1 O-ring


Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly as shown in the illustration.

NOTICE:

Do not damage the O-ring.



b.
A192239C95
1.49,1.938 1.781,1.938 1.781,1.938 1.865,1.583 false 1.323,1.844 1.635,2 0.313,0.156 10 false *a
*a Adhesive


Apply adhesive to 2 or 3 threads of 2 new bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



c.

Install the camshaft timing oil control solenoid assembly to the timing chain cover assembly with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control solenoid assembly.




d.

Connect the camshaft timing oil control solenoid assembly connector.


Hide 15370 3.INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Intake Side of Bank 2)

a.
A394294C01
1.219,0.979 1.99,1.781 1.99,1.781 2.844,0.979 true 1.938,1.781 2.25,1.938 0.313,0.156 10 false *1
*1 O-ring


Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly as shown in the illustration.

NOTICE:

Do not damage the O-ring.



b.
A192239C95
1.49,1.938 1.781,1.938 1.781,1.938 1.865,1.583 false 1.323,1.844 1.635,2 0.313,0.156 10 false *a
*a Adhesive


Apply adhesive to 2 or 3 threads of 2 new bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



c.

Install the camshaft timing oil control solenoid assembly to the timing chain cover assembly with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control solenoid assembly.




d.

Connect the camshaft timing oil control solenoid assembly connector.


Hide 12313 4.INSTALL ENGINE MOVING CONTROL ROD BRACKET

Hide 12327A 5.INSTALL NO. 2 ENGINE MOUNTING STAY RH

Hide 47233 6.INSTALL RESERVOIR BRACKET (for RHD)

Hide 47220D 7.INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY (for RHD)

Hide 55701J 8.INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

Hide 9.INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY (for RHD)

Hide 15370 10.INSTALL CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY (for Exhaust Side of Bank 2)

a.
A394294C01
1.219,0.979 1.99,1.781 1.99,1.781 2.844,0.979 true 1.938,1.781 2.25,1.938 0.313,0.156 10 false *1
*1 O-ring


Apply engine oil to a new O-ring and install it to the camshaft timing oil control solenoid assembly as shown in the illustration.

NOTICE:

Do not damage the O-ring.



b.
A192239C95
1.49,1.938 1.781,1.938 1.781,1.938 1.865,1.583 false 1.323,1.844 1.635,2 0.313,0.156 10 false *a
*a Adhesive


Apply adhesive to 2 or 3 threads of 2 new bolts.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent



c.

Using a 10 mm deep socket wrench, install the camshaft timing oil control solenoid assembly to the timing chain cover assembly with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control solenoid assembly.




d.

Connect the camshaft timing oil control solenoid assembly connector.


Hide 11209 12.INSTALL V-BANK COVER SUB-ASSEMBLY