Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2020.02–2020.11
RM37A0E _58 Vehicle Interior _086889 METER / GAUGE / DISPLAY _0416706 METER / GAUGE SYSTEM J

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  Speedometer Malfunction  


DESCRIPTION

FOR HV MODEL


The combination meter assembly receives vehicle speed signals from the No. 2 skid control ECU (brake actuator assembly) via CAN communication. The speed sensor detects the wheel speed and sends the appropriate signals to the No. 2 skid control ECU (brake actuator assembly). The No. 2 skid control ECU (brake actuator assembly) supplies power to the vehicle speed sensor. The No. 2 skid control ECU (brake actuator assembly) detects vehicle speed signals based on pulses of the voltage.


FOR GASOLINE MODEL


The combination meter assembly receives vehicle speed signals from the skid control ECU (brake actuator assembly) via CAN communication. The speed sensor detects the wheel speed and sends the appropriate signals to the skid control ECU (brake actuator assembly). The skid control ECU (brake actuator assembly) supplies power to the vehicle speed sensor. The skid control ECU (brake actuator assembly) detects vehicle speed signals based on pulses of the voltage.


WIRING DIAGRAM

E370855E54
0.677,2.271 3.042,2.521 2.365,0.25 10 false : CAN Communication Line 4.677,1.594 6.656,2 1.979,0.406 10 false Combination Meter Assembly 0.135,1.906 6.552,2.104 6.417,0.198 10 false Skid Control ECU (Brake Actuator Assembly)*2 4.25,2.396 6.698,2.594 2.448,0.198 10 false *1: for HV Model 5.49,2.396 6.958,2.698 1.469,0.302 10 false *2: for Gasoline Model 0.135,1.583 3.896,1.833 3.76,0.25 10 false No. 2 Skid Control ECU (Brake Actuator Assembly)*1

CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.

·

Factors that affect the indicated vehicle speed include the tire size, tire pressure, and tire wear. The speed indicated on the speedometer has an allowable margin of error. For details about testing and the margin of error, see the reference chart.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>ON-VEHICLE INSPECTION

·

Before starting the following inspection, check that the tire size and tire pressures are as specified.

Click hereSuspension>TIRE / WHEEL>TIRE AND WHEEL SYSTEM>INSPECTION



PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM

Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

2.CHECK FOR DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)

B

2.CHECK FOR DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)
a.

Check if electronically controlled brake system DTCs are output.

i.

for HV Model

Chassis > Brake/EPB > Trouble Codes
50001 435
Chassis > Brake Booster > Trouble Codes
50001 466

ii.

for Gasoline Model

Chassis > Brake/EPB > Trouble Codes
50001 435


Result:
Result Proceed to
DTCs are not output A
DTCs are output B



A

3.PERFORM ACTIVE TEST USING GTS

B

3.PERFORM ACTIVE TEST USING GTS
a.

Perform the Active Test according to the display on the GTS.

Body Electrical > Combination Meter > Active Test
Tester Display Measurement Item Control Range Diagnostic Note
Speedometer Operation (0km/h,0MPH) Speedometer
(0 km/h, 0 mph)
ON When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer.
Speedometer Operation (40km/h,40MPH) Speedometer
(40 km/h, 40 mph)
ON
·

When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer.

·

The value displayed on the speedometer may deviate.*


Speedometer Operation (80km/h,80MPH) Speedometer
(80 km/h, 80 mph)
ON
·

When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer.

·

The value displayed on the speedometer may deviate.*


Speedometer Operation (120km/h,120MPH) Speedometer
(120 km/h, 120 mph)
ON
·

When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer.

·

The value displayed on the speedometer may deviate.*


Speedometer Operation (160km/h,160MPH) Speedometer
(160 km/h, 160 mph)
ON
·

When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer.

·

The value displayed on the speedometer may deviate.*


Speedometer Operation (200km/h,200MPH) Speedometer
(200 km/h, 200 mph)
ON
·

When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer.

·

The value displayed on the speedometer may deviate.*


Speedometer Operation (240km/h,240MPH) Speedometer
(240 km/h, 240 mph)
ON When this Active Test is performed, an operation signal is sent directly to the combination meter assembly to operate the speedometer.

*: For the tolerance of each Speed Signal Input Active Test, refer to On-vehicle Inspection.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>ON-VEHICLE INSPECTION


Body Electrical > Combination Meter > Active Test
Tester Display
Speedometer Operation (0km/h,0MPH)
50004 409 199
Body Electrical > Combination Meter > Active Test
Tester Display
Speedometer Operation (40km/h,40MPH)
50004 409 200
Body Electrical > Combination Meter > Active Test
Tester Display
Speedometer Operation (80km/h,80MPH)
50004 409 201
Body Electrical > Combination Meter > Active Test
Tester Display
Speedometer Operation (120km/h,120MPH)
50004 409 202
Body Electrical > Combination Meter > Active Test
Tester Display
Speedometer Operation (160km/h,160MPH)
50004 409 203
Body Electrical > Combination Meter > Active Test
Tester Display
Speedometer Operation (200km/h,200MPH)
50004 409 204
Body Electrical > Combination Meter > Active Test
Tester Display
Speedometer Operation (240km/h,240MPH)
50004 409 205
OK:

Speedometer indication is normal.


HINT:

When the value of the Active Test is more than or equal to the speedometer upper limit, the indicated speed stops at the upper limit.



Result:
Result Proceed to
OK
(for HV Model)
A
OK
(for Gasoline Model)
B
NG C



A

REPLACE NO. 2 SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)

B

REPLACE SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)

C

REPLACE COMBINATION METER ASSEMBLY