G9282
1.INSTALL HYBRID BATTERY THERMISTOR
Be sure to wear insulated gloves and protective goggles.
| *a | HV Battery LH Side |
| *b | HV Battery Front Side |
| *c | 1st Module from the HV Battery LH Side
(Wire harness color: Pink) |
| *d | 11th Module from the HV Battery LH Side
(Wire harness color: Gray) |
| *e | 20th Module from the HV Battery LH Side
(Wire harness color: Sky blue) |
| *f | 22nd Module from the HV Battery LH Side
(Wire harness color: Red) |
| *g | 29th Module from the HV Battery LH Side
(Wire harness color: White) |
| *h | 40th Module from the HV Battery LH Side
(Wire harness color: Blue) |
Engage the 6 claws of the hybrid battery thermistor (sensor portions) to install the hybrid battery thermistor to the HV battery.
Install each hybrid battery thermistor (sensor portion) to the appropriate location shown in the illustration.
| *a | HV Battery LH Side |
| *b | HV Battery Front Side |
| *c | 5th Module from the HV Battery LH Side |
| *d | 13th Module from the HV Battery LH Side |
| *e | 17th Module from the HV Battery LH Side |
| *f | 25th Module from the HV Battery LH Side |
| *g | 35th Module from the HV Battery LH Side |
Engage the 5 clamps in the locations shown in the illustration.
Connect the battery voltage sensor connector.
Engage the 4 clamps.
Engage the claw to install the No. 3 hybrid battery packing to the HV battery.
G920NB
2.INSTALL UPPER HV BATTERY COVER SUB-ASSEMBLY
Be sure to wear insulated gloves and protective goggles.
Install the upper HV battery cover sub-assembly to the HV battery with the 13 nuts.
Engage the clamp.
3.INSTALL NO. 6 HV BATTERY CARRIER BRACKET
G920Q
4.INSTALL NO. 1 HYBRID BATTERY SHIELD SUB-ASSEMBLY
5.INSTALL HV BATTERY JUNCTION BLOCK ASSEMBLY
G92QC
6.INSTALL NO. 10 HV BATTERY SHIELD PANEL
G9510
7.INSTALL HV BATTERY