Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER › 2020.11–2021.10
RM37A0E _58 Vehicle Interior _086896 HEATING / AIR CONDITIONING _0417372 CONDENSER A

HEATING / AIR CONDITIONING  CONDENSER  INSTALLATION  


PROCEDURE

Hide 88460 1.INSTALL COOLER CONDENSER ASSEMBLY (for Gasoline Model)

a.
E432007C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides and 2 claws to install the cooler condenser assembly as shown in the illustration.

NOTICE:

Do not damage the cooler condenser assembly or radiator assembly when installing the cooler condenser assembly.


HINT:

If a new cooler condenser assembly is installed, add compressor oil to the cooler condenser assembly as follows.


Capacity:

Add 40 cc (1.35 fl. oz)


Compressor Oil:

ND-OIL 12 or equivalent



Hide 88460 2.INSTALL COOLER CONDENSER ASSEMBLY (for HV Model)

a.
E432005C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides to install the cooler condenser assembly as shown in the illustration.

NOTICE:

Do not damage the cooler condenser assembly or radiator assembly when installing the cooler condenser assembly.


HINT:

If a new cooler condenser assembly is installed, add compressor oil to the cooler condenser assembly as follows.


Capacity:

Add 40 cc (1.35 fl. oz)


Compressor Oil:

ND-OIL 11 or equivalent



Hide 88710 3.CONNECT AIR CONDITIONING TUBE ASSEMBLY (for Gasoline Model)

a.

Remove the vinyl tape from the cooler condenser assembly and air conditioning tube assembly.


b.
E391455C01
1.333,1.833 1.333,1.583 false 2.083,1.781 2.083,1.448 false 1.167,1.438 0.615,1.156 0.615,1.156 1.167,0.875 true 2.021,1.802 2.333,1.958 0.313,0.156 10 false *1 1.281,1.854 1.594,2.01 0.313,0.156 10 false *2 0.385,1.073 0.698,1.229 0.313,0.156 10 false *a
*1 Air Conditioning Tube Assembly
*2 Piping Clamp
*a Groove


Install a new piping clamp to the air conditioning tube assembly.

NOTICE:
·

Securely engage the piping clamp to the groove of the air conditioning tube assembly.

·

Do not open the piping clamp more than the diameter of the air conditioning tube assembly when installing it.

·

Do not install the piping clamp with the large diameter section facing the wrong direction.




c.

Sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces of the air conditioning tube assembly.

Compressor Oil:

ND-OIL 12 or equivalent



d.

Install the 2 O-rings to the air conditioning tube assembly.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free from foreign matter.



e.

Connect the air conditioning tube assembly to the cooler condenser assembly.

E432003C01
5.313,3.333 5.313,3 true 5.229,3.354 5.542,3.51 0.313,0.156 10 false *a
*a Large Diameter Section of Piping Clamp - -


NOTICE:

Connect the parts by holding the pipe, not the piping clamp.



f.

Securely insert the piping clamp to the point where the large diameter section of the piping clamp is covered by the cooler condenser assembly.

HINT:
·

When inserting, make sure that a click sound is heard.

·

Check that the cooler condenser assembly is securely connected by pulling it.




Hide 88710 4.CONNECT AIR CONDITIONING TUBE ASSEMBLY (for HV Model)

a.

Remove the vinyl tape from the cooler condenser assembly and air conditioning tube assembly.


b.
E391455C01
1.333,1.833 1.333,1.583 false 2.083,1.781 2.083,1.448 false 1.167,1.438 0.615,1.156 0.615,1.156 1.167,0.875 true 2.021,1.802 2.333,1.958 0.313,0.156 10 false *1 1.281,1.854 1.594,2.01 0.313,0.156 10 false *2 0.385,1.073 0.698,1.229 0.313,0.156 10 false *a
*1 Air Conditioning Tube Assembly
*2 Piping Clamp
*a Groove


Install a new piping clamp to the air conditioning tube assembly.

NOTICE:
·

Securely engage the piping clamp to the groove of the air conditioning tube assembly.

·

Do not open the piping clamp more than the diameter of the air conditioning tube assembly when installing it.

·

Do not install the piping clamp with the large diameter section facing the wrong direction.




c.

Sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces of the air conditioning tube assembly.

Compressor Oil:

ND-OIL 11 or equivalent



d.

Install the 2 O-rings to the air conditioning tube assembly.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free from foreign matter.



e.

Connect the air conditioning tube assembly to the cooler condenser assembly.

E434829C01
5.313,3.333 5.313,3 true 5.229,3.354 5.542,3.51 0.313,0.156 10 false *a
*a Large Diameter Section of Piping Clamp - -


NOTICE:

Connect the parts by holding the pipe, not the piping clamp.



f.

Securely insert the piping clamp to the point where the large diameter section of the piping clamp is covered by the cooler condenser assembly.

HINT:
·

When inserting, make sure that a click sound is heard.

·

Check that the cooler refrigerant liquid pipe A is securely connected by pulling it.




Hide 88703 5.CONNECT DISCHARGE HOSE SUB-ASSEMBLY (for Gasoline Model)

a.

Remove the vinyl tape from the discharge hose sub-assembly and cooler condenser assembly.


b.

Sufficiently apply compressor oil to a new O-ring and the fitting surface of the discharge hose sub-assembly.

Compressor Oil:

ND-OIL 12 or equivalent



c.

Install the O-ring to the discharge hose sub-assembly.

NOTICE:

Keep the O-ring and O-ring fitting surface free from foreign matter.



d.

Connect the discharge hose sub-assembly to the cooler condenser assembly with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 88703 6.CONNECT DISCHARGE HOSE SUB-ASSEMBLY (for HV Model)

a.

Remove the vinyl tape from the discharge hose sub-assembly and cooler condenser assembly.


b.

Sufficiently apply compressor oil to a new O-ring and the fitting surface of the discharge hose sub-assembly.

Compressor Oil:

ND-OIL 11 or equivalent



c.

Install the O-ring to the discharge hose sub-assembly.

NOTICE:

Keep the O-ring and O-ring fitting surface free from foreign matter.



d.

Connect the discharge hose sub-assembly to the cooler condenser assembly with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide G9010A 7.CONNECT RADIATOR ASSEMBLY (for HV Model)

a.

for Inverter Coolant:

i.
E431999C01
0,0 0,0 false
V113147

Install in this Direction


Install the radiator assembly to its original position as shown in the illustration.

NOTICE:

Do not apply excessive force to the No. 3 inverter cooling hose and No. 4 inverter cooling hose.



ii.

Engage the 2 claws.

NOTICE:

Be careful not to damage the radiator assembly (for inverter coolant) or radiator assembly.



iii.

Install the 4 bolts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)



Hide 16593B 8.INSTALL NO. 1 RADIATOR AIR GUIDE RH

a.
E431996C01
0,0 0,0 false
V113147

Install in this Direction


Engage the guide and claw to install the No. 1 radiator air guide RH as shown in the illustration.


b.

Install the clip.


Hide 16595B 9.INSTALL NO. 1 RADIATOR AIR GUIDE LH

a.
E431994C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides and claw to install the No. 1 radiator air guide LH as shown in the illustration.


b.

Install the clip.


Hide 88790B 10.INSTALL THERMISTOR ASSEMBLY (w/o Grille Shutter)

Hide 53205 11.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY (for 2GR-FKS)

Hide 53205 12.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY (for A25A-FXS)

Hide 17750A 13.INSTALL INLET AIR CLEANER ASSEMBLY (for 2GR-FKS)

Hide 17750A 14.INSTALL INLET AIR CLEANER ASSEMBLY (for A25A-FXS)

Hide 52021 16.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

Hide 52611 17.INSTALL FRONT BUMPER ENERGY ABSORBER

Hide 18.INSTALL FRONT BUMPER ASSEMBLY (w/o Grille Shutter)

Hide 53019F 19.INSTALL RADIATOR SHUTTER SUB-ASSEMBLY (w/ Grille Shutter)

Hide 20.CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT

Hide 21.WARM UP ENGINE (for Gasoline Model)

Hide 22.WARM UP COMPRESSOR (for HV Model)

Hide 53301 24.ADJUST HOOD SUB-ASSEMBLY