Home › Vehicle Exterior › DOOR / HATCH › HOOD LOCK CONTROL CABLE ASSEMBLY › from 2020.11
RM37A0E _59 Vehicle Exterior _086885 DOOR / HATCH _0418596 HOOD LOCK CONTROL CABLE ASSEMBLY A

DOOR / HATCH  HOOD LOCK CONTROL CABLE ASSEMBLY  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RHD and LHD.

·

The following procedure is for the LHD.



PROCEDURE

Hide 1.REMOVE FRONT WHEEL

Hide 76622C 2.REMOVE FRONT FENDER MUDGUARD

Hide 75086 3.REMOVE FRONT FENDER WHEEL OPENING MOULDING SUB-ASSEMBLY

Hide 53852B 4.REMOVE FRONT WHEEL OPENING EXTENSION PAD

Hide 53876A 5.REMOVE FRONT FENDER LINER

Hide 53295E 6.REMOVE COOL AIR INTAKE DUCT SEAL

Hide 53510 7.REMOVE HOOD LOCK ASSEMBLY (for LHD)

a.

w/ Engine Hood Courtesy Switch:

i.
B563345

Disengage the clamp.


ii.

Disconnect the connector.



b.
B563346C01
1.167,1.667 1.51,1.24 true 1.073,1.667 1.271,1.854 0.198,0.188 10 true *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the hood lock nut cap.


c.
B563347C01
1.833,1.552 2.479,1.844 true 2.5,1.76 2.708,1.958 0.208,0.198 10 true *1
*1 Hood Lock Bolt


Remove the 2 bolts and hood lock bolt.


d.
B563348

Disconnect the hood lock control cable assembly to remove the hood lock assembly.


Hide 53510 8.REMOVE HOOD LOCK ASSEMBLY (for RHD)

a.
B598624

Disengage the clamp.


b.

Disconnect the connector.


c.
B598618C01
1.167,1.74 1.51,1.313 true 0.948,1.667 1.146,1.854 0.198,0.188 10 true *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the hood lock nut cap.


d.
B598625C01
1.833,1.583 2.479,1.875 true 2.5,1.792 2.708,1.99 0.208,0.198 10 true *1
*1 Hood Lock Bolt


Remove the 2 bolts and hood lock bolt.


e.
B598626

Disconnect the hood lock control cable assembly to remove the hood lock assembly.


Hide 67914 9.REMOVE FRONT DOOR SCUFF PLATE

Hide 62112A 10.REMOVE COWL SIDE TRIM SUB-ASSEMBLY

Hide 55606 11.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 53601 12.REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.
B563349

Disconnect the hood lock control cable assembly to remove the hood lock control lever sub-assembly.


Hide 53630 13.REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD)

a.

Using a screwdriver, disengage each clamp and the grommet as shown in the illustration.

B606373C01
0.708,1.583 0.708,1.281 false 3.5,1.177 3.75,0.833 false 6.531,1.5 6.531,1.219 false 5.156,1.5 5.396,1.5 false 0.635,1.604 0.948,1.76 0.313,0.156 10 false *1 4.958,1.396 5.271,1.552 0.313,0.156 10 false *a 3.781,0.719 4.094,0.875 0.313,0.156 10 false *1 6.469,1.521 6.781,1.677 0.313,0.156 10 false *1
*1 Hood Lock Control Cable Assembly - -
*a Grommet - -


HINT:

Tape the screwdriver tip before use.



b.

Pull the hood lock control cable assembly from the engine compartment to remove it.


Hide 53630 14.REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY (for RHD)

a.

Using a screwdriver, disengage each clamp and the grommet as shown in the illustration.

B598627C01
0.583,1.344 0.583,1.063 false 2.021,1.323 1.74,1.323 false 3.958,1.021 3.594,1.229 false 6.25,1.281 5.917,1.573 false 0.531,1.354 0.844,1.583 0.313,0.229 10 false *1 2.052,1.229 2.365,1.469 0.313,0.24 10 false *a 3.979,0.958 4.292,1.188 0.313,0.229 10 false *1 6.271,1.188 6.583,1.417 0.313,0.229 10 false *1
*1 Hood Lock Control Cable Assembly - -
*a Grommet - -


HINT:

Tape the screwdriver tip before use.



b.

Pull the hood lock control cable assembly from the engine compartment to remove it.