HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Oct 2011 Nov 2011 – Mar 2012 Apr 2012 – Jul 2012 Aug 2012 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- *: Use the intelligent tester.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| NEXT |
|
 |
|
|
| 2.CUSTOMER PROBLEM ANALYSIS |
Interview the customer and confirm the trouble.
- HINT:
- Interview the customer to confirm the following:
- History of brake fluid replacement.
- Whether the engine was stopped intentionally when driving.
- Whether the brake and accelerator pedals were depressed simultaneously.
| NEXT |
|
 |
|
|
| 3.CHECK DTC AND FREEZE FRAME DATA* |
Check and record the DTCs and Freeze Frame Data.
Clear the DTCs and Freeze Frame Data (Click here for DTC Check/Clear, and Click here for Freeze Frame Data).
Reconfirm the DTC.
Check if the DTC is output again using the recorded DTC and Freeze Frame Data.
- HINT:
- If DTC U0073, U0100, U0123, U0124 or U0126 is output, first check the appropriate sensor for a momentary open circuit (Click here).
- Result:
Result
|
Proceed to
|
DTC output
|
A
|
DTC not output (Problem symptom does not occur)
|
B
|
DTC not output (Problem symptom occurs)
|
C
|
| 4.DIAGNOSTIC TROUBLE CODE CHART |
Proceed to the Diagnostic Trouble Code Chart (Click here).
| NEXT |
|
 |
|
|
Proceed to Symptom Simulation (How to Proceed with Troubleshooting) (Click here).
| NEXT |
|
 |
|
|
Proceed to the Problem Symptoms Table (Click here).
| NEXT |
|
 |
|
|
| NEXT |
|
 |
|
|
| 8.IDENTIFICATION OF PROBLEM |
| NEXT |
|
 |
|
|
| NEXT |
|
 |
|
|
| NEXT |
|
 |
|
|