B279C Theft Deterrent System Presence Detection
Diagnostic trouble codes · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
DESCRIPTION
If an ECM that is incompatible with the engine immobiliser system is installed, the ECM stores this DTC.
DTC Code
|
DTC Detection Condition
|
Trouble Area
|
DTC Output Confirmation Operation
|
B279C
|
An ECM that is incompatible with the engine immobiliser system is installed (1 trip detection logic*).
|
ECM
|
Check for DTCs.
|
- *: Only output while a malfunction is present.
Vehicle Condition and Fail-safe Operation when Malfunction Detected
Vehicle Condition when Malfunction Detected
|
Fail-safe Operation when Malfunction Detected
|
Engine cannot be started.
|
-
|
Related Data List and Active Test
DTC Code
|
Data List and Active Test
|
B279C
|
-
|
INSPECTION PROCEDURE
- NOTICE:
- When replacing the ECM, refer to the Service Bulletin.
- After performing repairs, perform the operation that fulfills the DTC output confirmation operation, and then confirm that no DTCs are output again.
| 1. REPLACE CURRENT ECM WITH PROPER ECM |
 |
Replace the current ECM with the proper ECM.
- for 1KD-FTV (except DPF): Click here
- for 1KD-FTV (for DPF): Click here
- for 2KD-FTV (except DPF): Click here
- for 2KD-FTV (for DPF): Click here
- for 1GR-FE: Click here
- for 2TR-FE: Click here
| NEXT |
|
 |
|
|