2014 Hilux · Service Manual HEATER & AIR CONDITIONING SYSTEM

INSTALLATION

Removal / installation · Vehicles built Aug 2012 – Jul 2013

Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013

HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. INSTALL NO. 1 HEATER RELAY
  1. Install the No. 1 heater relay.

  1. Attach the clamp to install the driver side junction block.

  1. Install the 2 nuts.


2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
(Click here)

3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY
(Click here)

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

← INSTALLATION (Jun 2011 – Jul 2012)INSTALLATION (from Aug 2013) →