Home › Engine / Hybrid System › 1KD-FTV ENGINE MECHANICAL › ENGINE UNIT(w/o Glow Plug Controller) › 2011.10–2012.04
RM1840EF _51 Engine / Hybrid System _009573 1KD-FTV ENGINE MECHANICAL _0052152 ENGINE UNIT(w/o Glow Plug Controller) A

1KD-FTV ENGINE MECHANICAL  ENGINE UNIT(w/o Glow Plug Controller)  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the injectors (including shuffling the injectors between the cylinders), common rail or cylinder head, it is necessary to replace the injection pipes with new ones.

·

When replacing the fuel supply pump, common rail, cylinder block, cylinder head, cylinder head gasket or timing gear case, it is necessary to replace the fuel inlet pipe with a new one.

·

After removing the injection pipes, clean them with a brush and compressed air.



PROCEDURE

Hide 5.REMOVE NO. 2 INTERCOOLER SUPPORT BRACKET

a.

Remove the 2 bolts and No. 2 intercooler support bracket.


Hide 6.REMOVE INTERCOOLER SUPPORT BRACKET

a.

Remove the 2 bolts and intercooler support bracket.


Hide 15.REMOVE EXHAUST MANIFOLD WITH TURBOCHARGER

a.
A236847

Remove the 8 nuts, 8 plate washers, 8 collars and exhaust manifold with turbocharger shown in the illustration.


Hide 18.REMOVE GENERATOR BRACKET

a.

Remove the bolt and generator bracket.


Hide 19.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

a.
A098937

Remove the 4 bolts and V-ribbed belt tensioner.


Hide 20.REMOVE NO. 1 COMPRESSOR MOUNTING BRACKET (w/ Air Conditioning System)

a.

Remove the 4 bolts and No. 1 compressor mounting bracket.


Hide 23.REMOVE WATER OUTLET

a.
A233596

Remove the 2 bolts, water outlet and gasket.


Hide 32.REMOVE TIMING GEAR COVER INSULATOR (w/ EGR Cooler)

a.
A148171

Remove the bolt and timing gear cover insulator.


Hide 33.REMOVE VACUUM PUMP ASSEMBLY

a.
A303104

Remove the 2 nuts, vacuum pump and 2 O-rings.


Hide 34.REMOVE VANE PUMP ASSEMBLY

a.
A233594

Remove the 2 nuts, vane pump and O-ring.


Hide 38.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH

a.
A233593
0.063,0.073 0.302,0.26 0.24,0.188 10 true *A 1.74,0.073 1.938,0.26 0.198,0.188 10 true *B
*A RH Side
*B LH Side


Remove the 4 bolts and front No. 1 engine mounting bracket.


Hide 39.REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH

a.

Remove the 4 bolts and front No. 1 engine mounting bracket.